Configuration guides, architecture decisions, and diagnostic method — written by the engineers who specify these systems. Every article is practical, and every figure in it can be checked on site.
What EDID is, how sources and displays negotiate capability, and how to configure EDID across a TELECIS matrix.
Read →How HDCP authentication works across a matrix, what a repeater is, key-count limits, and how to specify a system.
Read →A specifier's comparison of point-to-point HDBaseT distribution and networked AV-over-IP: latency, scale, and infrastructure cost.
Read →HDMI bandwidth tiers, CAT cable categories for HDBaseT, when active optical cable becomes necessary, and how to specify the last metre.
Read →What an AV-over-IP deployment requires from the network: multicast forwarding, IGMP snooping and querier, bandwidth.
Read →How Dante distributes audio over standard networks, what the clock master does, how latency is chosen.
Read →What 8K actually demands of an installation: 48 Gbps signalling, HDMI 2.1 Fixed Rate Link, per-output downscaling.
Read →A repeatable commissioning sequence for a routed boardroom: physical verification, EDID, HDCP, control, audio.
Read →An ordered diagnostic method for no-image, intermittent-image, and audio faults in a routed AV system, from the physical layer up.
Read →