Home›Support›Knowledge Base›8K Distribution
8K Distribution

8K in practice — bandwidth, FRL, downscaling, and specifying ahead of the curve

8K sources are entering commercial environments before 8K displays are common. The installation that accepts an 8K source, routes it natively, and delivers the right format to every display — 8K where the display supports it, cleanly downscaled where it does not — is the installation that survives its next refresh.

SIGNAL FUNDAMENTALS

What 8K asks of the cable

8K at 60Hz with 4:2:0 chroma and 10-bit colour requires roughly 40 Gbps. HDMI 2.1 provides for it through Fixed Rate Link signalling, a departure from the transition-minimised encoding used by earlier revisions, together with Display Stream Compression where the link requires it.

In practice this means the entire chain must carry it: an HDMI 2.1 source and display, a matrix that routes 8K, and a cable rated for 48 Gbps. A single 18 Gbps element anywhere in the path caps the system at 4K.

Routing 8K natively

A matrix that accepts 8K and immediately downscales it has solved the wrong problem. A routing core specified for 8K must carry the signal at full rate through the switching fabric, so the display capable of rendering it receives it intact.

Downscaling is then applied per output, independently. The 8K video wall receives 8K. The confidence monitor receives 4K. The recorder receives 1080p. One source, three formats, one routing decision.

Signal integrity across the fabric

At 40 Gbps, the analogue behaviour of the digital path matters. A well-engineered matrix carries equalisation on every input and re-timing on every output, which restores the eye pattern the cable degraded before the signal enters the switch.

The measurable consequence is jitter and bit-error-rate figures that hold across the specified cable length, rather than a system that works on the bench and marginally on site.

Specifying a room for the refresh it will get

Install active optical cable rated for 48 Gbps on the runs that will carry 8K. Specify a matrix that routes 8K natively with per-output downscaling. The current TELECIS routing range carries 4K @ 60Hz 4:4:4; the active optical cable is where an 8K source connects into a room today. Confirm the display's own HDMI port revision, since a display may be marketed as 8K while offering one 2.1 input among several 2.0 inputs.

The room then accepts today's 4K sources without compromise, and tomorrow's 8K sources without a matrix replacement.

Element8K requirement
SourceHDMI 2.1 output with FRL signalling
Cable48 Gbps rated; active optical beyond ~3 m
MatrixNative 8K routing with per-output downscaling
DisplayHDMI 2.1 input — verify the specific port
REF
Referenced in this article

Specified as a system.

Specifying for a project?

Specifying with this in mind?

Send the room and the constraints. We return the architecture, the bill of materials, and the route to supply.