Home›Products›Splitters
Product family

Splitters.

1×4 and 1×8 over HDMI, with a 1×2 and HDBaseT splitters to 150 m announced. Configured for one-to-many.

SPEC / SPLITTERS

One-to-many distribution is only simple when it is engineered. TELECIS splitters manage EDID per display and hold the signal to its datasheet across the fan-out.

2 products
Interfaces & standards
HDMI 2.0 / 2.0bHDCP 2.2Per-output 4K → 1080p downscalingHDBaseT to 150 mEDID management
SEL
Selection

Choosing a splitter?

Fan-out is only simple when EDID is managed. TC-SPL-102 (announced), TC-SPL-104 and TC-SPL-108 cover one-to-two through one-to-eight over HDMI, with the 1×4 downscaling per output and the 1×8 breaking audio out at the box. Where the displays are not in the same room as the source, the announced HDBaseT models carry the same fan-out to 150 m per output over CAT.

Ask first
Are the displays identical? If not, per-output EDID or downscaling stops the weakest display setting the format for all of them.
Distance
Beyond a few metres per leg, specify the HDBaseT variant rather than adding extenders behind an HDMI splitter.
HDCP
Every display in a fan-out participates in the key count. Mixed compliance shows as a black screen on one leg, not an error message.
Audio
If a zone needs programme audio, take it from a device that de-embeds it rather than from behind a display.
Specifying for a project?

Selecting within Splitters?

Tell us the room, the sources, and the displays. We return the architecture and the bill of materials.