Seventy-plus terms of specifier-grade AV vocabulary — defined the way TELECIS uses them, in two sentences or fewer, with the deeper reading linked where it exists.
Chroma subsampling ratios. 4:4:4 carries full colour information for every pixel; 4:2:2 and 4:2:0 share colour samples between pixels to reduce bandwidth. Text and fine UI detail demand 4:4:4; motion video tolerates 4:2:0 gracefully.
7680×4320 resolution — four times the pixels of 4K. At 60Hz it requires roughly 40 Gbps and HDMI 2.1 signalling end to end. See 8K in practice.
An interoperability standard for audio-over-IP that allows networked audio systems from different ecosystems, including Dante devices, to exchange streams.
An HDMI, DisplayPort, or USB-C cable that converts the signal to light internally, carrying full bandwidth over tens of metres with no attenuation penalty. Directional — the source and display ends are marked.
An HDMI feature that carries audio from a display back up the same cable to an audio system — the television's own apps heard through the room's loudspeakers.
Encapsulating audio-visual signal for transport across standard network infrastructure. Any endpoint can reach any endpoint; scale is bought with switch ports rather than matrix size. See HDBaseT or AV-over-IP.
The data rate a signal requires, determined by resolution, frame rate, chroma, and colour depth together. The constraint that actually decides cable and transport — a resolution number alone describes very little.
Video-wall scaling that accounts for the physical frame between panels, so an image crosses the join without geometric distortion.
Encoded multichannel audio — Dolby or DTS formats — passed intact to a downstream decoder rather than decoded at the source.
Twisted-pair cable categories. HDBaseT specifies shielded CAT6A for full distance and bandwidth; CAT6 operates at reduced distance. Solid-core, correctly terminated and bonded.
An HDMI control channel allowing devices to command one another — a source waking a display. In commercial systems, control is usually carried explicitly over RS-232 or IP instead, deterministically.
Sharing colour information between adjacent pixels to reduce bandwidth, exploiting the eye's lower sensitivity to colour detail than to brightness. Expressed as ratios: 4:4:4, 4:2:2, 4:2:0.
Bits per colour channel. 8-bit yields 16.7 million colours; 10-bit, over a billion — the difference between visible banding and smooth gradients, and a meaningful fraction of the bandwidth budget.
The disciplined sequence that turns a correct design into a working room — physical verification, signal path, EDID, HDCP, control, audio, and the handover record. See the method.
The dominant audio-over-IP ecosystem: multichannel audio across standard Ethernet with sample-accurate synchronisation from an elected clock master. See Dante for integrators.
The low-speed communication lines inside an HDMI cable that carry EDID and the HDCP handshake. A marginal cable fails here before it fails the video.
Extracting audio from an HDMI signal to a separate analogue or digital output — programme sound to an amplifier while video continues to the display.
Routing behaviour whose timing is fixed and repeatable rather than variable under load — the property that separates infrastructure from consumer switching.
Converting a signal to a lower resolution per output — an 8K source delivered natively to the video wall and as 4K to the confidence monitor, from one routing decision.
A visually lossless compression standard used within HDMI 2.1 links where the raw format exceeds even FRL bandwidth.
The audio processing core of an installation — routing, equalisation, echo cancellation, level management — configured at commissioning and then left to run.
Enhanced Audio Return Channel. The HDMI 2.1 revision of ARC with the bandwidth for full-rate, object-based audio formats back from the display.
The data block a display presents to a source declaring its capabilities — resolution, timings, audio formats. In routed systems, what the source is told becomes an engineering decision. See EDID, explained.
Stored, known-good EDID profiles a matrix can present to sources regardless of what is connected downstream — the deterministic strategy for mixed estates.
Input-stage compensation for the frequency-dependent losses of a cable run, restoring the signal's eye pattern before switching.
An oscilloscope view of signal integrity: the cleaner and more open the 'eye', the more margin the link has. Closed eyes are intermittent faults waiting for a warm day.
Optical transport. Single-mode carries signal for kilometres and is the standard for campus links; multi-mode serves shorter runs at lower optics cost.
The HDMI 2.1 signalling scheme that carries 8K-class bandwidth — a departure from TMDS. The whole chain must speak it: source, cable, matrix, display.
Point-to-point transport of video, audio, USB, control, and power over a single CAT cable at a fixed distance budget. The deterministic architecture for stable, countable rooms.
The content-protection system that encrypts HDMI links. Every device in the chain must authenticate; version 2.3 is current for 4K and 8K sources. See the handshake.
A device — a matrix, a splitter — that sits inside the protection chain, authenticating downstream as a receiver and upstream as a transmitter. Repeater depth and device counts are limited by the standard.
The HDMI revision introducing FRL signalling, 40–48 Gbps bandwidth tiers, eARC, and support for 8K and high-frame-rate 4K.
Encoding a wider range between the darkest and brightest parts of an image, with 10-bit colour as a practical prerequisite. Carried in metadata the whole signal path must preserve.
The electrical event by which a display announces its presence on an HDMI port, triggering EDID reading and HDCP authentication. Well-behaved infrastructure re-negotiates only where required.
The one device per VLAN responsible for refreshing multicast subscriptions so streams keep flowing and stale groups age out. Exactly one — by design, not accident.
The switch behaviour that listens to multicast subscription messages and forwards each stream only to the ports that asked for it — the difference between a working AV network and a flooded one. See network design.
Carrying infrared remote-control signals across an extension link, so a source in a rack answers to a handset in the room.
Timing variation in a digital signal's transitions. Excessive jitter closes the eye pattern; re-timing on every output is how infrastructure holds specification across real cable.
A visually lossless, low-latency compression used for AV-over-IP on 1 Gigabit networks — the balanced tier between uncompressed SDVoE and bandwidth-efficient H.265.
Extending or switching a computer's console — operators at one desk, machines in a secure room. Latency tolerance is near zero, which decides the transport.
Delay between signal entering and leaving the system. Interactive use demands sub-frame figures; signage tolerates whole frames. A specification line, never an accident.
Linear pulse-code modulation — uncompressed multichannel audio as carried over HDMI, up to 7.1 channels.
The routing core: any input to any output, or several at once, with EDID and HDCP managed per port. The reference architecture for source-to-display distribution.
A matrix built as a card frame — input and output boards fitted to requirement, changed as the estate changes, around a fixed switching fabric.
One-to-many network transmission: a transmitter sends a stream once and any number of receivers subscribe. The traffic model of AV-over-IP video.
Compositing several sources into one output — quad splits, picture-in-picture, custom layouts — rendered by the switcher rather than the display.
A switch fabric able to carry every port at line rate simultaneously. The qualification criterion for AV network switches, because video never pauses.
An extender receiver powered across the same CAT link that carries the signal — one cable to the display position, no local supply.
Standardised power delivered by a network switch over the data cable — how AV-over-IP endpoints and touch panels are typically fed.
A room-scale device combining source switching, scaling, audio handling, USB routing, and control — the single box a huddle or boardroom is built around.
The network clocking protocol beneath Dante and SDVoE synchronisation — sample- and frame-accurate time distributed from an elected master.
Network traffic prioritisation. Clock and audio packets ride ahead of bulk data, so a file transfer never becomes an audible dropout.
44.45 mm of vertical rack space. Matrices and switchers are specified in units; ventilation clearance is specified alongside.
Regenerating a signal's timing at the output stage, removing accumulated jitter so the next cable run starts clean. Applied per output in TELECIS routing.
The serial control standard of professional AV — deterministic, documented, and still the commissioning engineer's most reliable friend.
Processing that converts between resolutions and timings — per output in a matrix, so each display receives the format it renders best.
The coaxial transport of broadcast — 3G-SDI carries 1080p, 12G-SDI carries 4K, over BNC connections and long, lockable runs.
Software Defined Video over Ethernet — uncompressed 4K60 over 10 Gigabit with sub-frame latency. The AV-over-IP tier for rooms where every original bit must arrive.
Source changes with no black frame or resync pause — the switch happens between frames, which matters wherever an audience is watching.
The engineering discipline of keeping a digital signal's analogue reality — levels, timing, eye pattern — inside specification from source to display.
Total system delay of less than one video frame — under 16.7 ms at 60Hz. The threshold below which interaction feels direct.
Transition-Minimised Differential Signalling — the HDMI encoding used up to 18 Gbps, superseded by FRL at HDMI 2.1 bandwidths.
The optical digital-audio connection — S/PDIF over light. Electrically isolated, and still common at the display end of ARC extractions.
One-to-one network transmission, one stream per receiver. Correct for control traffic; ruinous for one-to-many video, which is why AV video is multicast.
Carrying DisplayPort video natively through a USB-C connector alongside data and power — one cable from a laptop to the room.
USB Video Class and USB Audio Class — the driverless standards that let a capture device appear to any computer as a plain webcam and microphone.
An array of displays driven as one canvas — source mapping, bezel correction, and scaling handled by the controller or seamless matrix.
Compression whose artefacts are below the threshold of perception under critical viewing — the engineering claim behind JPEG2000 AV-over-IP tiers.
A logically separate network segment on shared switching. AV endpoints live on their own VLAN: multicast contained, troubleshooting simplified, IT reassured.
Extension or encoding built into the wall box itself — the transmitter as room furniture, one gang or two, with the cabling behind the plaster.
Two colour encodings of the same image. YCbCr separates brightness from colour and is where subsampling happens; RGB is the native language of computers and their UIs.
The TCE (TELECIS Certified Engineer) certification examines what these words mean in a room. Begin at Core.