Home›Products›Switchers›2x1 HDMI / USB-C 4K60 Huddle Room Switcher
TC-PSWC-0201

2x1 HDMI / USB-C 4K60 Huddle Room Switcher

One USB-C cable brings a laptop to the room's display

Formerly listed as TC-PSWC-201; the code is as printed on the unit.

TC-PSWC-0201

Views marked “photographed” are photographs of production units at the TELECIS warehouse, cleaned for the web; nothing on the unit is drawn in.

TC-PSWC-0201 is a 2×1 switcher for the huddle room: one USB-C and one HDMI input to one HDMI output at up to 4K @ 60 Hz 4:4:4 (8-bit). A laptop needs one USB-C cable — DisplayPort Alt Mode video, USB 3.2 Gen 1 and 1G Ethernet, with charging at up to 100 W — and the HDMI input has a USB host port beside it for a room PC. HDMI 2.0b and HDCP 2.3, with HDR10, HDR10+, Dolby Vision and HLG supported.

The room's camera or speakerphone, on the two USB-A and one USB-C device ports, can follow the video, the last computer connected, or a manual choice — so a visitor's laptop runs the call on the room's equipment. A line-level microphone can be offered as a USB microphone to the computer on the USB host port, or USB or HDMI audio de-embedded to the line output — not both at once. Switching is automatic on signal or 5 V detection, or manual; the display powers on and off with the switcher; and control is by front panel, RS-232, TCP/IP or web GUI.

  • 2×1 — one USB-C and one HDMI input · one HDMI output
  • 4K60 4:4:4 — HDMI 2.0b · 18 Gbps · HDCP 2.3
  • USB-C — video, USB, 1G Ethernet and charging up to 100 W on one cable
  • USB 3.2 — 5 Gbps hub that follows the video
Drawings
AUDIO INL+L-R+R-AUDIO OUTL+L-R+R-5VDC 24VETHERNET 2ETHERNET 1SERVICEIR OUTRS-232GPIOOUT1234CONTROLRXTXIN 1IN 2AUTO21IRONOFFOUTUSB DEVICES3AUTO/3SHOSTUSB-C IN 1IN 2DISPLAYSWITCHER
Drawn from the production silkscreen · Switcher, top, with the end faces unfolded
TC-PSWC-0201 outline drawing, 230 × 130 × 23 mm (W × D × H)

Outline for layout, rack and furniture planning · millimetres, nominal, from the production artwork · connector protrusions, feet and cables not shown · not for manufacture

Signal path
LAPTOPUSB-CROOM PCHDMI + USBVIDEO · USB · ETHERNET · CHARGING2×1 SWITCHERTC-PSWC-0201HDMIDISPLAYLINE AUDIOAMPLIFIERUSB 3.2 GEN 1USB DEVICESCAMERA · SPEAKERPHONE1G ETHERNETNETWORK
one USB-C cable carries video, USB, network and charging
A
Specifications

The section that earns
the premium.

ParameterSpecification
Signal standardHDMI 2.0b · DisplayPort 1.4a Alt Mode on the USB-C input (the laptop's USB-C port must support DP Alt Mode)
HDCPHDCP 2.3
Maximum resolutionUp to 4096 × 2160 @ 60 Hz, input and output
ScalingThe output can downscale 4K to 1080p
Bandwidth18 Gbps video · USB 3.2 Gen 1 (5 Gbps)
Colour spaceRGB · YCbCr 4:4:4 / 4:2:2 / 4:2:0
Colour depth8/10/12-bit · 8-bit at 4K60 4:4:4
HDRHDR10, HDR10+, Dolby Vision, HLG
CECCEC control of the display and external devices
HDMI audio formatsLPCM, Dolby Digital/Plus/EX, Dolby TrueHD, Dolby Atmos, DTS, DTS-EX, DTS-96/24, DTS High Res, DTS-HD Master Audio, DSD
Audio de-embeddingAnalogue in embeds into HDMI or USB audio, or HDMI or USB audio de-embeds to analogue out — not both at once
Analogue audio inputBalanced or unbalanced stereo, 5-pin 3.5 mm Phoenix · 20 kΩ balanced / 10 kΩ unbalanced · max 8.2 dBu (2 Vrms) balanced
Analogue audio outputBalanced or unbalanced stereo, 5-pin 3.5 mm Phoenix · 600 Ω balanced / 300 Ω unbalanced · max 8.2 dBu (2 Vrms) balanced, 2.2 dBu (1 Vrms) unbalanced
Analogue performanceIn: 20 Hz–20 kHz ±0.5 dB, THD+N < 0.01 % · Out: 20 Hz–20 kHz ±1 dB, THD+N < 0.067 % · dynamic range and S/N > 90 dB · delay < 1 ms
Other audio formatsAnalogue: LPCM 2-channel, 32–192 kHz
NetworkDual 1G Ethernet with 802.1X and VLAN
Passive cable reachUSB 3.2 up to 1.5 m · HDMI up to 3 m
Inputs1 × HDMI · 1 × USB-C (DP Alt Mode, USB 3.2 Gen 1, 1G Ethernet, up to 100 W charging) · analogue L/R in
Outputs1 × HDMI · analogue L/R out
USBHosts: USB-C input + USB-B · Devices: 1 × USB-C + 2 × USB-A (USB 3.2 Gen 1, 5 V / 1.5 A)
Network ports2 × RJ45 (1G) · by default ETHERNET 1 for control, ETHERNET 2 for laptops on USB-C; switch mode gives both ports both roles
Control portsRS-232 (3-pin Phoenix) · IR out (3.5 mm) · GPIO (6-pin Phoenix) · USB-C service port
Control methodsFront-panel buttons, RS-232, TCP/IP, web GUI
EDID managementBuilt-in EDID list, copy from the HDMI output, and two user-defined EDID uploads (.bin)
IRIR learning window; IR out 5 Vp-p, 20–60 kHz
SwitchingAutomatic (signal or 5 V detection) or manual
OperationThe display powers on and off with the switcher, by CEC, IR or RS-232
Power supply24 V DC, 7.5 A · 100–240 V AC adapter
Power consumption37 W · 145 W with 100 W USB-C charging
Dimensions (W × D × H)230 × 130 × 23 mm
Weight796 g
HousingMetal, black
MountingDesk (rubber feet) or mounting ears
Operating temperature0 to 40 °C
Storage temperature−20 to 60 °C
HumidityOperating 20–80 % · storage 10–90 % RH, non-condensing
ESD protection±8 kV air · ±4 kV contact (IEC 61000-4-2)
ComplianceDesigned for global compliance — CE, FCC, RoHS, and regional certifications, as applicable.
Warranty3 years
In the boxSwitcher · 24 V / 7.5 A power supply · IR blaster cable (1.5 m) · 3-pin, 2 × 5-pin and 6-pin 3.5 mm Phoenix connectors · 4 rubber feet · 2 mounting ears · screws
Every value above is taken from the manufacturer's documentation for this model and matches the TELECIS datasheet. Subject to change without notice.
Specification text for consultants8 clauses · basis of design

Basis of design: TELECIS TC-PSWC-0201.

  1. General The switcher shall switch one USB-C and one HDMI input to one HDMI output; the USB-C input shall carry DP Alt Mode video, USB 3.2 Gen 1, 1G Ethernet and charging up to 100 W.
  2. Video The switcher shall support HDMI 2.0b, 18 Gbps and HDCP 2.3 up to 4096 × 2160 @ 60 Hz, with HDR10, HDR10+, Dolby Vision and HLG, and 4K to 1080p output downscaling.
  3. USB and connections The switcher shall provide a USB 3.2 Gen 1 hub (2 × USB-A, 1 × USB-C) following the video, the last computer connected or a manual choice; 2 × RJ45 (1G, 802.1X, VLAN); RS-232, IR out, GPIO and a USB-C service port.
  4. Audio The switcher shall pass formats including Dolby Atmos and DTS-HD Master Audio, and embed or de-embed analogue audio (5-pin Phoenix), not both at once.
  5. Control The switcher shall be controlled from front-panel buttons, RS-232, TCP/IP or web GUI, switch automatically or manually, and power the display on and off by CEC, IR or RS-232.
  6. Power The switcher shall use a 24 V DC, 7.5 A supply, at 37 W, or 145 W with 100 W USB-C charging.
  7. Physical The switcher shall measure 230 × 130 × 23 mm (W × D × H) and weigh 796 g.
  8. Environmental The switcher shall operate at 0 to 40 °C and 20–80 % RH, non-condensing, and be stored at −20 to 60 °C.

Written to paste into a project specification; every clause is taken from the manufacturer's documentation behind this page. Check the datasheet revision before issue.

B
Documents

Engineering documentation,
plainly accessible.

C
Within the family

Specified as a system.

D
Specifying this model

Where it belongs.

The huddle room reduced to its actual requirement: a laptop arrives, presents, and takes the room. USB-C carries the picture and the peripherals on one cable, HDMI, with its USB host port, is there for a room PC or a presenter with an adapter, and switching happens on signal detection so the meeting starts when the cable clicks in rather than after a settings hunt. Camera, speakerphone and peripherals follow the live source.

Confirm the guest laptop population's Alt Mode and charging expectations before standardising a room on USB-C.
Specifying for a project?

Where to buy.

TELECIS is sold through authorised regional partners, and directly by the TELECIS specification desk where no partner is appointed. Write with the model and the project.