Home›Products›Switchers›4x1 4K60 HDMI Multiview Switcher
TC-PMV-0401

4x1 4K60 HDMI Multiview Switcher

Four sources on one 4K60 display, in eight layouts

Formerly listed as TC-PMW-401.

TC-PMV-0401

TC-PMV-0401 puts up to four HDMI sources on one display at up to 4K @ 60 Hz, in eight layouts: single, picture-in-picture, two side-by-side, two triple and two quad. The picture-in-picture window comes in three sizes and four corners, or is placed and sized freely from the PC software. A built-in scaler matches the output to the display, from 1024 × 768 up to 4096 × 2160 @ 60 Hz, and switching is seamless in single-screen mode and fast in multiview. Inputs and output are HDMI 2.0b at 18 Gbps with HDCP 2.2, in 8-bit colour.

Audio follows the source chosen for it and is de-embedded to analogue L/R (RCA) and optical outputs, with volume control for LPCM; the HDMI output carries PCM up to 7.1, Dolby Digital and Digital Plus, DTS and DTS High Res (HBR formats are not supported). Nineteen EDID modes, one a user EDID, set the format the sources send. Control is from the front panel, IR remote, on-screen menu, PC software or RS-232; there is no network control.

  • Eight — layouts: single, PiP, side-by-side, triple, quad
  • 4K60 — in and out · HDMI 2.0b · HDCP 2.2
  • Seamless — switching in single-screen mode; fast in multiview
  • 19 — EDID modes, including a user EDID

Views marked “photographed” are photographs of production units at the TELECIS warehouse, cleaned for the web; nothing on the unit is drawn in.

Drawings
DC 12VIR EXTRS-232HD 1OPTICALRLHD 2HD 3HD 4RXTXINPUTOUTPUTHDMULTIVIEW SWITCHER
Drawn from the production silkscreen · Multiview switcher, top, with the end faces unfolded
TC-PMV-0401 outline drawing, 220 × 100 × 30 mm (W × D × H)

Outline for layout, rack and furniture planning · millimetres, nominal, from the production artwork · connector protrusions, feet and cables not shown · not for manufacture

Signal path
SOURCE 1HDMISOURCE 2HDMISOURCE 3HDMISOURCE 4HDMI4×1 MULTIVIEWTC-PMV-0401HDMIUP TO 4096 × 2160 @ 60DISPLAYEIGHT LAYOUTS · PiP · QUADOPTICAL · L/RAMPLIFIERSELECTED AUDIO · LPCM VOLUMERS-232 · IRCONTROL
four sources on one display; the chosen audio de-embedded to an amplifier
A
Specifications

The section that earns
the premium.

ParameterSpecification
Signal standardHDMI 2.0b
HDCPHDCP 2.2 / 1.x
Maximum resolutionUp to 4K @ 60 Hz in and out; output up to 4096 × 2160 @ 60 Hz
ScalingScaler: 14 output resolutions from 1024 × 768 to 4096 × 2160 @ 60 Hz, or AUTO
Bandwidth18 Gbps
Colour spaceRGB · YCbCr 4:4:4 / 4:2:2 / 4:2:0
Colour depth8-bit
MultiviewEight layouts: single, picture-in-picture, two side-by-side, two triple, two quad · PiP in three sizes and four corners, or user-set size and position · full-screen or 16:9 aspect in the side-by-side, triple and second quad layouts
HDMI audio formatsPCM 2.0/5.1/7.1, Dolby Digital / Digital Plus, DTS, DTS High Res — HBR audio not supported
Audio de-embeddingAnalogue L/R and optical S/PDIF out, with independent audio selection; volume control for LPCM
Other audio formatsAnalogue: PCM 2.0 · Optical: Dolby Digital, DTS 5.1, PCM 2.0
Inputs4 × HDMI (Type A)
Outputs1 × HDMI · analogue L/R (RCA) · optical (S/PDIF)
Control portsRS-232 (3-pin 3.81 mm terminal) · IR extension (3.5 mm)
Control methodsFront panel, IR remote, on-screen menu, PC control software, RS-232 commands — no network control
EDID management19 modes: 17 fixed (4K60 to 720p; 2.0, 5.1 or 7.1 ch), AUTO and one user EDID
IRIR remote; 38 kHz IR extension receiver (cable supplied)
SwitchingSeamless in single-screen mode; fast in multiview; automatic switching in single-screen mode
Firmware updateFirmware update over RS-232 (PC software)
Power supply12 V DC, 2.5 A (locking adapter, 100–240 V AC)
Power consumption10 W max
Dimensions (W × D × H)220 × 100 × 30 mm
Weight620 g
HousingMetal enclosure, black
MountingTwo mounting ears (supplied) or rubber feet
Operating temperature0 to 40 °C
Storage temperature−20 to 60 °C
Humidity20–80 % operating, 10–90 % storage, non-condensing
ESD protection±8 kV air · ±4 kV contact (IEC 61000-4-2)
ComplianceDesigned for global compliance — CE, FCC, RoHS, and regional certifications, as applicable.
Warranty3 years
In the boxSwitcher · IR remote · 3-pin terminal plug · IR receiver cable (1.5 m) · 2 mounting ears with screws · 4 rubber feet · 12 V / 2.5 A locking adapter
Every value above is taken from the manufacturer's documentation for this model and matches the TELECIS datasheet. Subject to change without notice.
Specification text for consultants9 clauses · basis of design

Basis of design: TELECIS TC-PMV-0401.

  1. General The switcher shall show up to four 4K60 sources on one display in eight layouts (single, picture-in-picture, two side-by-side, two triple, two quad), switching seamlessly in single-screen mode and fast in multiview.
  2. Video The switcher shall support HDMI 2.0b, 18 Gbps and HDCP 2.2 / 1.x up to 4K @ 60 Hz, with a scaler offering 14 output resolutions from 1024 × 768 to 4096 × 2160 @ 60 Hz, or AUTO.
  3. Colour The switcher's colour depth shall be 8-bit.
  4. Audio The switcher shall pass PCM 2.0/5.1/7.1, Dolby Digital / Digital Plus, DTS and DTS High Res (HBR audio not supported), and de-embed to analogue L/R (RCA) and optical S/PDIF, with independent audio selection.
  5. Control The switcher shall be controlled from the front panel, IR remote, on-screen menu, PC software or RS-232, with 19 EDID modes including one user EDID.
  6. Connections The switcher shall provide 4 × HDMI inputs, 1 × HDMI output, RS-232 (3-pin 3.81 mm terminal) and IR extension (3.5 mm).
  7. Power The switcher shall use a 12 V DC, 2.5 A locking adapter (100–240 V AC), at 10 W max.
  8. Physical The switcher shall measure 220 × 100 × 30 mm (W × D × H) and weigh 620 g, with mounting ears or rubber feet.
  9. Environmental The switcher shall operate at 0 to 40 °C and 20–80 % humidity, non-condensing, and be stored at −20 to 60 °C.

Written to paste into a project specification; every clause is taken from the manufacturer's documentation behind this page. Check the datasheet revision before issue.

B
Documents

Engineering documentation,
plainly accessible.

C
Within the family

Specified as a system.

D
Specifying this model

Where it belongs.

Some rooms do not choose between sources; they have to see them together. Four inputs share one screen in eight layouts — single, picture-in-picture, side-by-side, triple or quad — for a monitoring position, a gallery or a situation desk. The picture-in-picture window is set from three sizes and four corners, or placed and sized freely from the PC software.

Confirm the layouts the room actually uses, and that it needs no network control: this model is driven from the front panel, IR, RS-232 or the PC software.
Specifying for a project?

Where to buy.

TELECIS is sold through authorised regional partners, and directly by the TELECIS specification desk where no partner is appointed. Write with the model and the project.