Home›Products›Splitters›1x2 4K60 HDMI Splitter
TC-SPL-102

1x2 4K60 HDMI Splitter

One source, two displays

TC-SPL-102
ANNOUNCEDThis model is being added to the range. Write to sales@telecis.com to be notified when it ships.

TC-SPL-102 distributes one HDMI 2.0b source to two displays at full 4K @ 60Hz 4:4:4 with HDCP 2.2 handled automatically — the simplest piece of signal infrastructure, built to the same standard as the largest.

Two outputs, no compromise on either: the second display receives what the first does, and the unit is built to sit behind a panel without being thought about.

  • One source, two displays
  • 1×2 routing
  • Datasheet and documentation on request, per model
A
Specifications

The section that earns
the premium.

ParameterSpecification
Configuration1×2
Maximum resolutionUp to 4K @ 60Hz (3840×2160), 4:4:4
HDMI standardHDMI 2.0b, HDCP 2.2
BandwidthUp to 18 Gbps
Audio formatsMultichannel PCM / bitstream pass-through
EDIDManagement with internal library, copy, and custom upload
ComplianceDesigned for global compliance — CE, FCC, RoHS, and regional certifications, as applicable.
Warranty3 years
Specifications indicative, and may change before release; the datasheet is published when the model ships.
B
Documents

Engineering documentation,
plainly accessible.

C
Within the family

Specified as a system.

D
Specifying this model

Where it belongs.

One source, two displays. The simplest device in the range and the one most often specified carelessly: a passive splitter degrades the signal and lets the weaker display dictate the format. This one regenerates both legs and manages EDID from an internal library so the stronger display is not held back.

If the two displays differ in capability, confirm which EDID mode the room should run before commissioning.
Specifying for a project?

Where to buy.

TELECIS is sold through authorised regional partners, and directly by the TELECIS specification desk where no partner is appointed. Write with the model and the project.