Home›Products›Splitters›1x8 4K60 HDMI Splitter
TC-SPL-108

1x8 4K60 HDMI Splitter

Eight displays from one source, with the audio broken out at the box

TC-SPL-108

TC-SPL-108 distributes one HDMI 2.0 source to eight displays at up to 4K @ 60 Hz — 4:4:4 at 8-bit, or 4:2:2 at 12-bit, 18 Gbps — with HDCP 2.2 and HLG, HDR10, HDR10+ and Dolby Vision passed through. Every output has its own 4K-to-1080p downscaler, switched on or off per output on a DIP switch, so 4K and 1080p displays can share one source.

Programme audio also leaves at the splitter: S/PDIF (TOSLINK) with PCM 2.0, Dolby Digital or DTS 5.1, and analogue stereo on a 3-pin Phoenix connector, so an amplifier needs no display in the chain. EDID is set on a second DIP switch, or copied from any output with the front-panel EDID COPY buttons or over the API, and the unit takes commands over RS-232. It runs on a 12 V, 1 A adapter, and the brackets supplied fix it to a surface or a rack shelf.

  • 4K60 4:4:4 — 8-bit · HDMI 2.0 · 18 Gbps · HDCP 2.2
  • 8 × HDMI — outputs, each with its own 1080p downscaler
  • HDR — HLG · HDR10 · HDR10+ · Dolby Vision
  • S/PDIF — and analogue stereo, taken out at the splitter
Drawings
RS232AUDIO OUTS/PDIF OUTHDMI OUT8HDMI OUT7HDMI OUT6HDMI OUT5HDMI INHDMI OUT4HDMI OUT3HDMI OUT2HDMI OUT112VGRXTXRGLPOWERHDMI INHDMI OUTEDIDDOWNSCALEREDID COPYCOPYOUTPUTSELECTOUTPUTUPDOWNUPDOWN12345678SPLITTER
Drawn from the production silkscreen · Splitter, top, with the end faces unfolded
TC-SPL-108 outline drawing, 270 × 120 × 21 mm (W × D × H)

Outline for layout, rack and furniture planning · millimetres, nominal, from the production artwork · connector protrusions, feet and cables not shown · not for manufacture

Signal path
SOURCEHDMICONTROLRS-2321×8SPLITTERDISPLAY 1DISPLAY 2DISPLAY 3DISPLAY 4DISPLAY 51080p DISPLAYDISPLAY 7DISPLAY 8HDMI OUTPUTS · 4K60, OR SCALED TO 1080pS/PDIF · L/RAMPLIFIERPROGRAMME AUDIO AT THE SPLITTER
eight displays, and programme audio taken out at the splitter
A
Specifications

The section that earns
the premium.

ParameterSpecification
Signal standardHDMI 2.0
HDCPHDCP 2.2
Maximum resolution4K @ 60 Hz 4:4:4 8-bit, or 4:2:2 12-bit (to 4096 × 2160)
ScalingEach output has its own 4K → 1080p downscaler, switched on or off by an 8-pin DIP switch
Bandwidth18 Gbps
HDRHLG, HDR10, HDR10+, Dolby Vision
CECCEC display on / off
HDMI audio formatsAll HDMI 2.0 formats incl. PCM, Dolby TrueHD, Dolby Atmos, DTS-HD Master Audio, DTS:X
Audio de-embeddingS/PDIF (TOSLINK): PCM 2.0, Dolby Digital, DTS 5.1 · analogue stereo (3-pin 3.5 mm Phoenix)
Passive cable reachPassive HDMI in/out: 15 m at 1080p60 · 10 m at 4K30 · 5 m at 4K60
Inputs1 × HDMI
Outputs8 × HDMI · S/PDIF (TOSLINK) · analogue stereo (3-pin 3.5 mm Phoenix)
Control portsRS-232 (3-pin 3.5 mm Phoenix)
Control methodsAPI commands over RS-232 · DIP switches · front-panel buttons
EDID management4-pin DIP switch: copy mode (any output, by the EDID COPY buttons or API), fixed modes, customised mode · falls back to 4K60 4:4:4 2-ch HDR if a copy fails
Power supply12 V DC, 1 A adapter
Power consumption6.73 W max
Dimensions (W × D × H)270 × 120 × 21 mm
Weight830 g
MountingBrackets supplied — rack or surface mounting
Operating temperature0 to 45 °C
Storage temperature−20 to 70 °C
Humidity10–90 %, non-condensing
ESD protection±8 kV air · ±4 kV contact (human-body model)
ComplianceDesigned for global compliance — CE, FCC, RoHS, and regional certifications, as applicable.
Warranty3 years
In the boxSplitter · 12 V power adapter · 2 × 3-pin 3.5 mm Phoenix plugs · 2 mounting brackets with screws
Every value above is taken from the manufacturer's documentation for this model and matches the TELECIS datasheet. Subject to change without notice.
Specification text for consultants9 clauses · basis of design

Basis of design: TELECIS TC-SPL-108.

  1. General The splitter shall distribute 1 × HDMI input to 8 × HDMI outputs.
  2. Video The splitter shall support HDMI 2.0, 18 Gbps and HDCP 2.2 up to 4K @ 60 Hz 4:4:4 (to 4096 × 2160), with HLG, HDR10, HDR10+ and Dolby Vision; each output shall have its own 4K → 1080p downscaler, set by DIP switch.
  3. Colour The splitter shall support deep colour up to 12-bit.
  4. Audio The splitter shall carry all HDMI 2.0 formats, including Dolby TrueHD, Dolby Atmos, DTS-HD Master Audio and DTS:X, and de-embed PCM 2.0, Dolby Digital or DTS 5.1 to S/PDIF, with analogue stereo (3-pin 3.5 mm Phoenix).
  5. Control The splitter shall be controlled by API commands over RS-232 (3-pin 3.5 mm Phoenix), DIP switches and front-panel buttons, switch displays on and off by CEC, and set EDID by DIP switch: copy (any output), fixed or customised.
  6. Cable reach The splitter shall support passive HDMI runs in and out of 15 m at 1080p60, 10 m at 4K30 and 5 m at 4K60.
  7. Power The splitter shall use a 12 V DC, 1 A adapter, at 6.73 W max.
  8. Physical The splitter shall measure 270 × 120 × 21 mm (W × D × H) and weigh 830 g, with brackets for rack or surface mounting.
  9. Environmental The splitter shall operate at 0 to 45 °C, be stored at −20 to 70 °C, and tolerate 10–90 % humidity, non-condensing.

Written to paste into a project specification; every clause is taken from the manufacturer's documentation behind this page. Check the datasheet revision before issue.

B
Documents

Engineering documentation,
plainly accessible.

C
Within the family

Specified as a system.

D
Specifying this model

Where it belongs.

Eight displays, and the audio taken out at the box rather than behind a screen. Downscaling is switched per output on an 8-pin DIP switch and EDID is set on a four-way DIP switch; audio de-embeds to TOSLINK and analogue stereo on a phoenix connector, and RS-232 gives the control system a way in through API commands. It is a distribution amplifier specified like a piece of infrastructure.

Every display in a fan-out participates in the HDCP key count — confirm all eight are compliant before commissioning.
Specifying for a project?

Where to buy.

TELECIS is sold through authorised regional partners, and directly by the TELECIS specification desk where no partner is appointed. Write with the model and the project.