Home›Products›Extenders›1080P HDMI Extender over CAT6 (50m)
TC-EXT-50

1080P HDMI Extender over CAT6 (50m)

Reaches 50 m over standard infrastructure

Formerly listed as TC-EXT-50-FHD. Until this revision, TC-EXT-50 identified a 4K60 extender that was listed but never sold, now TC-EXT-50-4K; for 4K60 over CAT6/6A, specify TC-EXT-70.

TC-EXT-50

TC-EXT-50 carries 1080p @ 60Hz 4:4:4 across 50 m of CAT6 — 40 m over CAT5e — for the signage drops, lecterns and utility runs where Full HD is the specification and reliability is the requirement.

One-way power-over-cable feeds the receiver from the transmitter, so the display end needs no outlet, and IR passes through for source control from the room. Fixed 1080p EDID keeps every source honest.

  • Uncompressed 1080p @ 60Hz 4:4:4 across 50 m of CAT6
  • One-way PoC — no outlet needed at the display end
  • IR pass-through for source control from the room
Drawings
HDMI INDC 5VUTP OUTIR OUTEQHDMI OUTUSB 5V50M30MUTP INIR INTRANSMITTERRECEIVER
Drawn from the production silkscreen · Transmitter and receiver, top, with the end faces unfolded
TC-EXT-50 outline drawing, 70 × 70.2 × 20 mm (W × D × H)

Outline for layout, rack and furniture planning · millimetres, nominal, from the production artwork · connector protrusions, feet and cables not shown · not for manufacture

The specification gives 21 mm overall; this outline, drawn from the production artwork, shows 20 mm.

A
Specifications

The section that earns
the premium.

ParameterSpecification
Signal standardHDMI 1.3b
HDCPHDCP 1.4
Maximum resolution1080p @ 60 Hz, 4:4:4
Bandwidth4.85 Gbps
TransportUncompressed over one CAT cable (point to point)
Transmission distance50 m over CAT6/6A/7 · 40 m over CAT5e (1080p60)
Power over the linkOne-way PoC — the transmitter powers the receiver; 5 V supply at the transmitter
InputsTransmitter: 1 × HDMI · DC 5 V · receiver: UTP from the transmitter · IR in (3.5 mm)
OutputsTransmitter: UTP to the receiver · IR out (3.5 mm) · receiver: 1 × HDMI
Other portsReceiver: micro-USB 5 V power input
Control methodsNo control interface · 30 m / 50 m EQ switch on the receiver
EDID managementFixed 1080p @ 60 Hz, 2-channel
IROne-way IR, receiver → transmitter (3.5 mm TRS)
Power supply5 V DC, 1 A adapter (at the transmitter)
Dimensions (W × D × H)70 × 70.2 × 21 mm (each unit)
HousingSheet steel
ComplianceDesigned for global compliance — CE, FCC, RoHS, and regional certifications, as applicable.
Warranty3 years
In the box5 V / 1 A adapter · 4 mounting brackets per pair · IR emitter cable · IR receiver cable (30–50 kHz)
Kit compositionTransmitter + receiver pair
Every value above is taken from the manufacturer's documentation for this model and matches the TELECIS datasheet. Subject to change without notice.
Specification text for consultants7 clauses · basis of design

Basis of design: TELECIS TC-EXT-50.

  1. General The extender shall be a transmitter and receiver pair carrying HDMI, uncompressed, over one CAT cable, point to point.
  2. Video The extender shall support HDMI 1.3b, 4.85 Gbps and HDCP 1.4, up to 1080p @ 60 Hz 4:4:4, with the EDID fixed at 1080p @ 60 Hz, 2-channel.
  3. Transmission The extender shall reach 50 m over CAT6/6A/7 and 40 m over CAT5e at 1080p60, with an EQ switch on the receiver for 30 m or 50 m runs.
  4. Control The extender shall carry IR one way, from the receiver back to the transmitter (3.5 mm); it shall need no control interface.
  5. Connections The transmitter shall provide 1 × HDMI input, 1 × UTP output, IR out (3.5 mm) and DC 5 V; the receiver 1 × UTP input, 1 × HDMI output, IR in (3.5 mm) and a micro-USB 5 V power input.
  6. Power One 5 V DC, 1 A adapter at the transmitter shall power both units over the cable (one-way PoC).
  7. Physical Each unit shall measure 70 × 70.2 × 21 mm, in a sheet-steel housing.

Written to paste into a project specification; every clause is taken from the manufacturer's documentation behind this page. Check the datasheet revision before issue.

B
Documents

Engineering documentation,
plainly accessible.

C
Within the family

Specified as a system.

D
Specifying this model

Where it belongs.

Not every run needs 4K, and pretending otherwise is how retrofit budgets are wasted. This is the honest 1080p extender for existing cable and existing displays: fifty metres over CAT6/6A, forty over CAT5e, with the receiver powered from the transmitter over the same cable so the far end needs no local supply.

The EDID is fixed at 1080p60 two-channel. Where a source must negotiate higher, this is the wrong device — deliberately.
Specifying for a project?

Where to buy.

TELECIS is sold through authorised regional partners, and directly by the TELECIS specification desk where no partner is appointed. Write with the model and the project.