100 m of HDBaseT, with USB at the far end
Formerly listed as TC-EXTC-100.
TC-EXTU-100 extends HDMI 2.0b up to 100 m over a single CAT6A/7 cable, using HDBaseT: 4K @ 60 Hz with full 4:4:4 colour, and HDR10, HDR10+, Dolby Vision and HLG passed through. HDCP 2.3, 2.2 and 1.x are all supported, and one 24 V supply at either end powers both units over the same cable.
USB 2.0 travels on the same cable: a PC on the transmitter's USB-B host port reaches a camera, keyboard, mouse or storage on the receiver's four USB-A ports, so the computer stays in the rack and its peripherals at the display. Infrared and RS-232 pass both ways and CEC passes through. The receiver also outputs programme audio on a 3.5 mm jack, and EDID is set on the transmitter by DIP switch — copied from the display, or a standard 4K60 SDR stereo profile.
Outline for layout, rack and furniture planning · millimetres, nominal, from the production artwork · connector protrusions, feet and cables not shown · not for manufacture
| Parameter | Specification |
|---|---|
| Signal standard | HDMI 2.0b |
| HDCP | HDCP 2.3 / 2.2 / 1.x |
| Maximum resolution | Up to 4K @ 60 Hz 4:4:4 (to 4096 × 2160) |
| Bandwidth | 18 Gbps |
| Colour space | RGB · YCbCr 4:4:4 / 4:2:2 / 4:2:0 |
| Colour depth | 8/10/12-bit |
| HDR | HDR10, HDR10+, Dolby Vision, HLG |
| CEC | CEC pass-through |
| HDMI audio formats | LPCM, Dolby Digital/Plus/EX, Dolby TrueHD, Dolby Atmos, DTS, DTS-EX, DTS-96/24, DTS High Res, DTS-HD Master Audio, DTS:X |
| Audio de-embedding | Receiver: analogue audio out (3.5 mm) |
| Transport | HDBaseT |
| Transmission distance | 100 m at 4K60 over CAT6A/7 |
| Power over the link | Bi-directional PoC — one 24 V supply at either end powers both |
| Inputs | Transmitter: 1 × HDMI · Receiver: 1 × HDBaseT (RJ45) |
| Outputs | Transmitter: 1 × HDBaseT (RJ45) · Receiver: 1 × HDMI + 3.5 mm analogue audio |
| USB | USB 2.0 · transmitter USB-B host · receiver 4 × USB-A (1 A per pair) |
| Control ports | Each end: IR in/out (3.5 mm), RS-232 (3-pin Phoenix), USB-C service port |
| Control methods | Pass-through: IR and RS-232 in both directions, and CEC |
| EDID management | DIP switch: TV (copy from the display) or STD (4K60 4:4:4 SDR, 2-ch) |
| IR | Wideband 20–60 kHz, 5 Vp-p |
| Power supply | 24 V DC, 1 A locking supply |
| Dimensions (W × D × H) | 157 × 88 × 20 mm (each unit) |
| Weight | Transmitter 371 g · receiver 378 g |
| Housing | Metal, black |
| Operating temperature | 0 to 40 °C |
| Storage temperature | −20 to 60 °C |
| Humidity | Operating 20–80 % · storage 10–90 % RH, non-condensing |
| ESD protection | ±8 kV air · ±4 kV contact (IEC 61000-4-2) |
| Compliance | Designed for global compliance — CE, FCC, RoHS, and regional certifications, as applicable. |
| Warranty | 3 years |
| In the box | Transmitter · receiver · 24 V / 1 A locking supply · USB-A to USB-B cable · IR blaster cable (1.5 m) · wideband IR receiver cable (1.5 m) · 2 × 3-pin Phoenix · 4 mounting ears · 8 screws |
| Kit composition | Sold as a kit — transmitter + receiver |
Basis of design: TELECIS TC-EXTU-100.
Written to paste into a project specification; every clause is taken from the manufacturer's documentation behind this page. Check the datasheet revision before issue.
When the far end is a workstation rather than a display, the video is only half the requirement. This extender carries 4K @ 60Hz 4:4:4 to 100 m over HDBaseT and takes USB 2.0 peripherals with it, so a camera, a touchscreen or a keyboard at the far end behaves as though it were plugged into the source.
TELECIS is sold through authorised regional partners, and directly by the TELECIS specification desk where no partner is appointed. Write with the model and the project.