A model number is read far more often than it is typed. It is read on a bill of materials at review, on a rack elevation at 2am, on a tender line by a procurement officer who has never seen the product. Most AV numbering fails exactly there — strings of letters that mean something to the manufacturer's ERP and nothing to the person holding the spec.
The TC system is built the other way: it is a grammar, and the reader is the point. Every TELECIS model reads TC — series — configuration — qualifiers, left to right, each part carrying its own meaning and nothing else's.
The zero is the separator
Configuration is inputs, a zero, outputs: 404 is 4×4. 808 is 8×8. 201 is 2×1. The zero scales without ambiguity — 16016 is 16×16, 36036 is 36×36 — where "1616" and "3636" would eventually collide with something. Distances are metres, plain: TC-EXT-70 reaches 70 m and says so. Amplifiers state channels × watts: TC-MA-DA-8150 is eight channels of 150 W, and the name is the datasheet's first row.
Series letters carry the class
PMX is a matrix, PMV and PMW multiview, PSWC the huddle-room switching line, EXT an extender — EXTU when USB rides along — SPL a splitter, IPT the AV-over-IP transceivers, AUD the audio converters, AIDU and DIAU the Dante converters. The P prefix appears on room products and stays off accessories, so the letters even tell you what kind of object you are racking. Qualifiers close the sentence: HDBT and the metres, ARC, KVM, 8K, VW for video wall, DA for Dante.
Why this matters commercially
A consultant who can parse a model number without opening a browser makes fewer substitution errors, and a substitution error discovered at commissioning is the most expensive kind. The entire catalogue — every model across nine families — now speaks this one grammar. Specify TC-PMX-404-HDBT-70-ARC and every reader between you and the finished room knows it is a 4×4 matrix, HDBaseT at 70 metres, with audio return — before the datasheet is even requested.
A model number you can read is a specification error you never made.
Editor's note, October 2026. Corrected to the range as it stands: the USB extender's series letters are EXTU (as on TC-EXTU-100; EXTC was the earlier form); the Dante converters' letters, AIDU and DIAU, are added; and the multiview switchers read PMV and PMW, since the 4×1 is now listed under the code printed on its carton, TC-PMV-0401.
Editor's note, 18 November 2026. Three models now ship with the codes printed on them, and the range follows the label: the 4×4 and 8×8 matrices are TC-PMX-0404 and TC-PMX-0808, and the 2×1 huddle-room switcher is TC-PSWC-0201. Like TC-PMV-0401, they write inputs and outputs as two digits each; the configuration still reads 4×4, 8×8 and 2×1. The catalogue now lists eight families (Control Systems returns when a model ships). The article above is left as written; its links go to the models under their new codes.