Two wired sources, wireless casting, and the room's USB peripherals — on one switcher, with the control network kept separate from the guest one.
Formerly listed as TC-PSWB-201.
Preliminary specification · datasheet REV 0.7.
TC-PSWC-W is a BYOD presentation switcher for one display. A laptop joins by USB-C — video, USB 3.0, network and up to 60 W of charging on one cable — or by HDMI, or shares wirelessly by AirPlay, Miracast or the TC-DONGLE-W dongle. Inputs are taken at up to 4K @ 30Hz and the HDMI output runs at up to 4K @ 60Hz; two sources can share the screen in dual-view.
Switching is automatic — a source appears once connected, and the layout adds a view as a second source joins — while the room's USB devices follow the most recent host, independently of the video. Two gigabit Ethernet ports can be isolated to keep a secure LAN for the room's control system, and control is by the built-in web server, Telnet CLI or RS-232.
Outline for layout, rack and furniture planning · millimetres, nominal, from the production artwork · connector protrusions, feet and cables not shown · not for manufacture
| Parameter | Specification |
|---|---|
| HDCP | HDCP 1.4 on inputs · HDCP 2.2 on the output |
| Maximum resolution | Inputs up to 3840 × 2160 @ 30 Hz · output up to 3840 × 2160 @ 60 Hz |
| Bandwidth | HDMI in 9 Gbps · HDMI out 18 Gbps · USB-C 8.1 Gbps per DP lane, 5 Gbps USB 3.0 |
| Colour depth | 8-bit · RGB or YCbCr 4:4:4 / 4:2:2 |
| Multiview | Up to two concurrent sources (dual-view) |
| Analogue audio output | Balanced stereo (5-pin 3.5 mm Phoenix) |
| Other audio formats | Input PCM 16-bit, 2-ch, 32 / 44.1 / 48 kHz · HDMI output PCM 16-bit, 2-ch, 48 kHz |
| Network | 2 × 10/100/1000 Ethernet · transparent or isolated mode (secure LAN reserved for the controller) |
| Wireless | 2 × Wi-Fi 802.11 a/b/g/n/ac · dual band 2.4 / 5 GHz · 2T2R to 867 Mbps · WEP, TKIP, AES, WPA, WPA2 |
| Wireless casting | AirPlay mirroring (to 1080p60) · Miracast (to 1080p60) · USB-C dongle (to 2160p30) |
| Inputs | 1 × USB-C (video, USB 3.0 host, USB-to-Ethernet bridge, charging to 60 W) · 1 × HDMI |
| Outputs | 1 × HDMI · 1 × balanced analogue audio |
| USB | 3 × USB 3.0 Type-A device (1 A each) · 1 × USB 3.0 Type-B host · USB-C input as second host · USB-C pairing/update port (USB 2.0) |
| Control ports | RS-232 (3-pin 3.5 mm Phoenix) |
| Other ports | 4 × SMA Wi-Fi antenna connectors · DC 20 V screw-lock input |
| Control methods | Built-in web server (configuration, firmware) · Telnet CLI · RS-232 port for a room controller or peripheral |
| EDID management | Fixed default, user-customisable, up to 3840 × 2160 @ 30 Hz 4:4:4 |
| Switching | Automatic by default — a source is shown once connected, and the layout adds views as sources join · manual via API · audio follows the video most recently brought on screen · USB switched independently of video, following the most recent host |
| Firmware update | Upload through the web UI, or automatic from a USB drive |
| Power supply | 20 V DC (5.5 / 2.1 mm screw-lock) · 20 V 6 A adapter |
| Dimensions (W × D × H) | 215 × 160 × 25 mm |
| Housing | Sheet steel, painted |
| Mounting | On or under the desk, or ceiling |
| Compliance | Designed for global compliance — CE, FCC, RoHS, and regional certifications, as applicable. |
| Warranty | 3 years |
| In the box | 20 V 6 A power supply · 4 mounting ears and screws · 4 Wi-Fi antennas · 3-pin and 5-pin 3.5 mm Phoenix connectors |
Specified to the same standard, within the family.
View →Specified to the same standard, within the family.
View →Specified to the same standard, within the family.
View →TELECIS is sold through authorised regional partners, and directly by the TELECIS specification desk where no partner is appointed. Write with the model and the project.