Home›Products›Pro Audio›Dante 2ch 150W Class D Amplifier
TC-MA-DA-2150

Dante 2ch 150W Class D Amplifier

Dante networked audio, commissioning-ready

TC-MA-DA-2150
ANNOUNCEDThis model is being added to the range. Write to sales@telecis.com to be notified when it ships.

TC-MA-DA-2150 is two channels of Class-D amplification at 150 W each, fed from Dante/AES67 — the amplifier for a zone or a single room on a networked audio estate.

Networked in, speaker level out, controlled from the web console or Dante Controller: the small building block that lets a Dante design reach the last loudspeaker without an analogue detour.

  • Dante networked audio, commissioning-ready
  • Datasheet and documentation on request, per model
A
Specifications

The section that earns
the premium.

ParameterSpecification
Networked audioDante / AES67
Amplification2 channels × 150 W, Class-D
ControlWeb GUI, TCP/IP, Dante Controller
ComplianceDesigned for global compliance — CE, FCC, RoHS, and regional certifications, as applicable.
Warranty3 years
Specifications indicative, and may change before release; the datasheet is published when the model ships.
B
Documents

Engineering documentation,
plainly accessible.

C
Within the family

Specified as a system.

D
Specifying this model

Where it belongs.

Two channels of Class-D amplification that take their feed from the network rather than from a cable run. For a zone that needs real power but not a rack of it — a meeting room, a small hall, a foyer — this puts the amplifier where the loudspeakers are and leaves the signal on the fabric until the last moment.

Confirm the loudspeaker load and whether the zone is low-impedance or constant-voltage before selecting the amplifier.
Specifying for a project?

Where to buy.

TELECIS is sold through authorised regional partners, and directly by the TELECIS specification desk where no partner is appointed. Write with the model and the project.