Home›Products›Pro Audio›2ch Dante In to Line Out Converter
TC-DIAU-2C

2ch Dante In to Line Out Converter

Two Dante channels back to analogue line level — metal-cased, install-grade.

TC-DIAU-2C

TC-DIAU-2C is the network's exit: it receives two Dante channels and delivers them as analogue line level, wherever the amplifier, recorder or assistive-listening system happens to live.

Metal-cased for installation rather than desks, it makes the last metre of a networked audio estate as disciplined as the first — two receive channels over 100 Mbps Ethernet, analogue out, no ceremony.

  • Two Dante channels received to analogue line level
  • Metal case, install-grade — the network's edge, wherever the amplifier is

Views marked “photographed” are photographs of production units at the TELECIS warehouse, cleaned for the web; nothing on the unit is drawn in.

A
Specifications

The section that earns
the premium.

ParameterSpecification
Analogue audio output2-channel line output, balanced or unbalanced (6-pin 3.81 mm Phoenix)
Networked audioDante · AES67 RTP
GainOutput level, on a 3-position GAIN switch: +18 dBu, 0 dBu (default) or −10 dBV
Other audio formatsPCM 2.0 · 44.1 / 48 / 96 kHz · up to 24-bit
Network100 Mbps
Transmission distance100 m (CAT6/6A)
Power over the linkPoE, IEEE 802.3af Class 0
Network ports1 × RJ45 Dante (PoE)
Other portsDC 12 V in (2-pin 3.81 mm Phoenix)
Control methodsDante Controller
Power supplyPoE, IEEE 802.3af Class 0 — no adapter supplied (a 12 V DC input, 2-pin Phoenix, is also fitted)
Power consumption1.32 W
Dimensions (W × D × H)120 × 47 × 26 mm
Weight186 g
HousingMetal, black
Operating temperature0 to 40 °C
Storage temperature−20 to 60 °C
Humidity20–90 % RH, non-condensing
ComplianceDesigned for global compliance — CE, FCC, RoHS, and regional certifications, as applicable.
Warranty3 years
In the boxConverter · 6-pin and 2-pin 3.81 mm Phoenix connectors
Every value above is taken from the manufacturer's documentation for this model and matches the TELECIS datasheet. Subject to change without notice.
Specification text for consultants7 clauses · basis of design

Basis of design: TELECIS TC-DIAU-2C.

  1. General The converter shall convert Dante, with AES67 RTP support, to a 2-channel balanced or unbalanced line output.
  2. Audio The converter shall set output level on a 3-position GAIN switch: +18 dBu, 0 dBu (default) or −10 dBV, and handle PCM 2.0 at 44.1 / 48 / 96 kHz, up to 24-bit.
  3. Network The converter shall provide 1 × RJ45 Dante (PoE) at 100 Mbps, reaching 100 m over CAT6/6A, and be configured with Dante Controller.
  4. Connections The converter shall provide a 6-pin 3.81 mm Phoenix audio output and a DC 12 V input (2-pin 3.81 mm Phoenix).
  5. Power The converter shall be powered by PoE (IEEE 802.3af Class 0), at 1.32 W; no adapter is supplied.
  6. Physical The converter shall measure 120 × 47 × 26 mm (W × D × H) and weigh 186 g, in a black metal housing.
  7. Environmental The converter shall operate at 0 to 40 °C, be stored at −20 to 60 °C, and tolerate 20–90 % RH, non-condensing.

Written to paste into a project specification; every clause is taken from the manufacturer's documentation behind this page. Check the datasheet revision before issue.

B
Documents

Engineering documentation,
plainly accessible.

C
Within the family

Specified as a system.

D
Specifying this model

Where it belongs.

The return path: two Dante channels out to analogue line level, wherever an existing amplifier, hearing loop or recorder needs a conventional input. Metal-cased and small enough to sit at the equipment rather than in the rack.

Confirm the destination's expected input level, and label the subscription — an unlabelled Dante channel is a support call.
Specifying for a project?

Where to buy.

TELECIS is sold through authorised regional partners, and directly by the TELECIS specification desk where no partner is appointed. Write with the model and the project.