Home›Products›Pro Audio›2ch Line In to Dante Out Converter
TC-AIDU-2C

2ch Line In to Dante Out Converter

Two analogue line channels onto the Dante network — metal-cased, install-grade.

TC-AIDU-2C

TC-AIDU-2C puts two channels of analogue line level onto the Dante network — the clean on-ramp for sources that predate networked audio: a lectern feed, a legacy DSP output, a local player.

Metal-cased and install-grade, it belongs behind the rack, above the ceiling, or under the table — wherever the analogue signal originates — and appears on the network as two Dante transmit channels over 100 Mbps Ethernet.

  • Two channels of analogue line level onto the Dante network
  • Metal case, install-grade — behind the rack, above the ceiling, under the table

Views marked “photographed” are photographs of production units at the TELECIS warehouse, cleaned for the web; nothing on the unit is drawn in.

A
Specifications

The section that earns
the premium.

ParameterSpecification
Analogue audio input2-channel line input, balanced or unbalanced (6-pin 3.81 mm Phoenix)
Networked audioDante · AES67 RTP
GainInput level, on a 3-position GAIN switch: +18 dBu, 0 dBu (default) or −10 dBV
Other audio formatsPCM 2.0 · 44.1 / 48 / 96 kHz · up to 24-bit
Network100 Mbps
Transmission distance100 m (CAT6/6A)
Power over the linkPoE, IEEE 802.3af Class 0
Network ports1 × RJ45 Dante (PoE)
Other portsDC 12 V in (2-pin 3.81 mm Phoenix)
Control methodsDante Controller
Power supplyPoE, IEEE 802.3af Class 0 — no adapter supplied (a 12 V DC input, 2-pin Phoenix, is also fitted)
Power consumption1.2 W
Dimensions (W × D × H)120 × 47 × 26 mm
Weight186 g
HousingMetal, black
Operating temperature0 to 40 °C
Storage temperature−20 to 60 °C
Humidity20–90 % RH, non-condensing
ComplianceDesigned for global compliance — CE, FCC, RoHS, and regional certifications, as applicable.
Warranty3 years
In the boxConverter · 6-pin and 2-pin 3.81 mm Phoenix connectors
Every value above is taken from the manufacturer's documentation for this model and matches the TELECIS datasheet. Subject to change without notice.
Specification text for consultants7 clauses · basis of design

Basis of design: TELECIS TC-AIDU-2C.

  1. General The converter shall convert a 2-channel balanced or unbalanced line input to Dante, with AES67 RTP support.
  2. Audio The converter shall set input level on a 3-position GAIN switch: +18 dBu, 0 dBu (default) or −10 dBV, and handle PCM 2.0 at 44.1 / 48 / 96 kHz, up to 24-bit.
  3. Network The converter shall provide 1 × RJ45 Dante (PoE) at 100 Mbps, reaching 100 m over CAT6/6A, and be configured with Dante Controller.
  4. Connections The converter shall provide a 6-pin 3.81 mm Phoenix audio input and a DC 12 V input (2-pin 3.81 mm Phoenix).
  5. Power The converter shall be powered by PoE (IEEE 802.3af Class 0), at 1.2 W; no adapter is supplied.
  6. Physical The converter shall measure 120 × 47 × 26 mm (W × D × H) and weigh 186 g, in a black metal housing.
  7. Environmental The converter shall operate at 0 to 40 °C, be stored at −20 to 60 °C, and tolerate 20–90 % RH, non-condensing.

Written to paste into a project specification; every clause is taken from the manufacturer's documentation behind this page. Check the datasheet revision before issue.

B
Documents

Engineering documentation,
plainly accessible.

C
Within the family

Specified as a system.

D
Specifying this model

Where it belongs.

Two analogue line inputs onto a Dante fabric, in a body small enough to live where the source is. It is how a legacy mixer, a paging station's line output or a playback deck joins a networked estate without being replaced.

Confirm the source's output level and that the position has PoE: no adapter is supplied.
Specifying for a project?

Where to buy.

TELECIS is sold through authorised regional partners, and directly by the TELECIS specification desk where no partner is appointed. Write with the model and the project.