Home›Products›Matrices›4×2 4K60 HDMI Matrix Switcher
TC-PMX-402

4×2 4K60 HDMI Matrix Switcher

Four HDMI sources to two displays, each output chosen and scaled on its own

TC-PMX-402

TC-PMX-402 routes any of four HDMI sources to either of two displays at up to 4096 × 2160 @ 60 Hz 4:4:4, over HDMI 2.0 at 18 Gbps with HDCP 2.2. Each output downscales 4K to 1080p on its own, so one 4K source can feed a 4K display and an HD display at the same time. HDR10, HLG and Dolby Vision pass through, and deep colour up to 12-bit, 3D and lip sync are supported.

Output 1 de-embeds its audio to a 3.5 mm analogue stereo output and an optical (S/PDIF) output; output 2's optical output carries either its own audio or the display's ARC audio, chosen by a switch. The HDMI outputs carry LPCM up to 7.1, Dolby TrueHD and Atmos, and DTS-HD Master Audio and DTS:X. Control is from the front-panel buttons, the IR remote, which also switches CEC displays on and off, or RS-232 on a 3-pin terminal. Passive HDMI cables reach 5 m at 4K60 4:4:4 and 10 m at 4K30 4:4:4 or 4K60 4:2:0.

  • 2 × HDMI — outputs · any of four sources on each
  • 4K60 4:4:4 — HDMI 2.0 · 18 Gbps · HDCP 2.2
  • HDR10 — HLG · Dolby Vision · up to 12-bit colour
  • 1080p — each output downscales 4K on its own
Drawings
HDMI IN1HDMI IN2HDMI IN3HDMI IN4HDMI OUT1OPTICALAUDIO OUTHDMI OUT2OPTICAL5VGRXTXARCOPTICALRS232OUTPUT2OUTPUT1POWERIROUTPUT1INPUTOUTPUT2INPUT12341234MATRIX
Drawn from the production silkscreen · Matrix, top, with the end faces unfolded
TC-PMX-402 outline drawing, 220 × 100.2 × 21 mm (W × D × H)

Outline for layout, rack and furniture planning · millimetres, nominal, from the production artwork · connector protrusions, feet and cables not shown · not for manufacture

Signal path
SOURCE 1HDMISOURCE 2HDMISOURCE 3HDMISOURCE 4HDMI4×2 MATRIXTC-PMX-402HDMI OUT 1UP TO 4096 × 2160 @ 60 Hz · OR 1080pDISPLAY 1HDMI OUT 2UP TO 4096 × 2160 @ 60 Hz · OR 1080pDISPLAY 2OPTICAL · 3.5 mmOUT 2 OPTICAL: ITS AUDIO OR ARCAMPLIFIERRS-232 · IRCONTROL
any source to either display; audio to an amplifier from output 1 or output 2
A
Specifications

The section that earns
the premium.

ParameterSpecification
Signal standardHDMI 2.0
HDCPHDCP 2.2
Maximum resolutionUp to 4096 × 2160 @ 60 Hz, 4:4:4 (4K UHD and DCI)
ScalingEach output downscales 4K → 1080p independently
Bandwidth18 Gbps
Colour depthUp to 12-bit deep colour; 3D; lip sync
HDRHDR10, HLG and Dolby Vision
HDMI audio formatsLPCM 2.0/5.1/7.1, Dolby TrueHD, Dolby Atmos, DTS-HD Master Audio, DTS:X
Audio de-embeddingOutput 1: analogue 3.5 mm stereo + optical (S/PDIF) · Output 2: optical (S/PDIF)
Audio returnOutput 2's optical output carries either output-2 audio or the display's ARC audio (DIP switch)
Other audio formatsAnalogue: PCM 2.0 · Optical: PCM 2.0/5.1, Dolby Digital and DTS up to 5.1
Passive cable reachPassive HDMI: 5 m at 4K60 4:4:4 · 10 m at 4K30 4:4:4 or 4K60 4:2:0 · 1080p60: 15 m in, 10 m out
Inputs4 × HDMI
Outputs2 × HDMI · 1 × 3.5 mm analogue stereo · 2 × optical (S/PDIF)
Control portsRS-232 on a 3-pin 3.5 mm terminal
Control methodsRS-232, IR remote, front-panel buttons
IRIR remote selects each output's source and switches CEC displays on and off; two IR system codes
Power supply5 V DC, 1 A
Power consumption3.3 W max
Dimensions (W × D × H)220 × 100.2 × 21 mm (without brackets)
Weight540 g
MountingTwo mounting brackets (supplied)
Operating temperature0 to 45 °C
Storage temperature−20 to 70 °C
Humidity10–90 %, non-condensing
ESD protection±8 kV air · ±4 kV contact (human-body model)
ComplianceDesigned for global compliance — CE, FCC, RoHS, and regional certifications, as applicable.
Warranty3 years
In the boxMatrix · 5 V DC adapter · IR remote · 3-pin terminal plug · 2 mounting brackets with screws
Every value above is taken from the manufacturer's documentation for this model and matches the TELECIS datasheet. Subject to change without notice.
Specification text for consultants9 clauses · basis of design

Basis of design: TELECIS TC-PMX-402.

  1. General The matrix shall route any of four HDMI sources to either of two displays (4 × HDMI inputs, 2 × HDMI outputs), each output downscaling 4K → 1080p independently.
  2. Video The matrix shall support HDMI 2.0, 18 Gbps and HDCP 2.2 up to 4096 × 2160 @ 60 Hz, 4:4:4 (4K UHD and DCI), with HDR10, HLG and Dolby Vision, 3D and lip sync.
  3. Colour The matrix shall support deep colour up to 12-bit.
  4. Audio The matrix shall pass LPCM 2.0/5.1/7.1, Dolby TrueHD, Dolby Atmos, DTS-HD Master Audio and DTS:X, de-embedding analogue 3.5 mm stereo and optical (S/PDIF) from output 1 and optical from output 2, which can carry the display's ARC audio instead (DIP switch). The analogue output shall carry PCM 2.0, and the optical outputs PCM 2.0/5.1, Dolby Digital and DTS up to 5.1.
  5. Control The matrix shall be controlled by RS-232 (3-pin 3.5 mm terminal), IR remote and front-panel buttons; the IR remote shall also switch CEC displays on and off.
  6. Cable reach The matrix shall support passive HDMI runs of 5 m at 4K60 4:4:4, 10 m at 4K30 4:4:4 or 4K60 4:2:0, and at 1080p60 15 m in and 10 m out.
  7. Power The matrix shall be powered from 5 V DC, 1 A, drawing 3.3 W max.
  8. Physical The matrix shall measure 220 × 100.2 × 21 mm (W × D × H, without brackets) and weigh 540 g.
  9. Environmental The matrix shall operate at 0 to 45 °C, be stored at −20 to 70 °C, and tolerate 10–90 % humidity, non-condensing.

Written to paste into a project specification; every clause is taken from the manufacturer's documentation behind this page. Check the datasheet revision before issue.

B
Documents

Engineering documentation,
plainly accessible.

C
Within the family

Specified as a system.

D
Specifying this model

Where it belongs.

Four sources, two displays, and a signal path that does not flatten what passes through it. The 4×2 suits a room with four sources and two displays that should keep HDR and object audio intact: Dolby Vision, HDR10 and HLG reach both outputs, and the object-audio formats pass through rather than being downmixed. Audio de-embeds at output one on analogue and TOSLINK together, and at output two on TOSLINK, selectable between breakout and display ARC.

Confirm the display's HDR handshake behaviour, and which of the two outputs feeds the audio system.
Specifying for a project?

Where to buy.

TELECIS is sold through authorised regional partners, and directly by the TELECIS specification desk where no partner is appointed. Write with the model and the project.