Home›Products›Matrices›1x4 Video Wall Controller
TC-PMX-104-VW

1x4 Video Wall Controller

One source, four panels, bezel-corrected as one canvas

TC-PMX-104-VW
ANNOUNCEDThis model is being added to the range. Write to sales@telecis.com to be notified when it ships.

TC-PMX-104-VW drives a four-display wall from a single source: bezel-corrected scaling and source-to-region mapping at 4K @ 60Hz 4:4:4 in, so a 2×2 wall reads as one picture rather than four.

Layouts are set once and recalled — from the front panel, IR, RS-232, TCP/IP or the web console — which is what a reception wall or a monitoring position needs: to look the same every morning.

  • One source, four panels, bezel-corrected as one canvas
  • 1×4 routing
  • Video-wall scaling and bezel correction built in
  • Datasheet and documentation on request, per model
A
Specifications

The section that earns
the premium.

ParameterSpecification
Configuration1×4 matrix
Maximum resolutionUp to 4K @ 60Hz (3840×2160), 4:4:4
HDMI standardHDMI 2.0b, HDCP 2.2
BandwidthUp to 18 Gbps
Video wallBezel-corrected scaling, source-to-region mapping
Audio formatsMultichannel PCM / bitstream pass-through
EDIDManagement with internal library, copy, and custom upload
ControlFront panel, IR, RS-232, TCP/IP, Web GUI
ComplianceDesigned for global compliance — CE, FCC, RoHS, and regional certifications, as applicable.
Warranty3 years
Specifications indicative, and may change before release; the datasheet is published when the model ships.
B
Documents

Engineering documentation,
plainly accessible.

C
Within the family

Specified as a system.

D
Specifying this model

Where it belongs.

A video wall is one picture, not four screens showing the same thing. The 1×4 takes a single source and maps it across a 2×2 canvas with bezel correction, so a line that crosses a panel edge arrives on the other side where the eye expects it. Source-to-region mapping means the wall can also be driven as independent tiles when the content calls for it, from the same device and the same control protocol.

Confirm the exact panel model and bezel dimensions before commissioning — bezel correction is a measured setting.
Specifying for a project?

Where to buy.

TELECIS is sold through authorised regional partners, and directly by the TELECIS specification desk where no partner is appointed. Write with the model and the project.