Home›Products›Converters›4K60 HDMI Audio Extractor
TC-DE-EMBEDDER

4K60 HDMI Audio Extractor

Audio out of the HDMI path — S/PDIF and analogue, picture untouched

Formerly listed as TC-AUD-EXT.

TC-DE-EMBEDDER

TC-DE-EMBEDDER sits in an HDMI 2.0 path and de-embeds programme audio without disturbing the picture: video passes through at up to 4K @ 60Hz 4:4:4 with HDCP 2.2 intact and HDR — HDR10 and Dolby Vision — preserved to the display. Audio leaves on two paths at once: S/PDIF over TOSLINK, and analogue stereo on RCA. With a Dolby Digital or DTS source, only the optical output carries audio.

A three-stage EDID switch sets the audio capability the source sees, so a player never negotiates a format the room cannot reproduce. Automatic input equalisation compensates for the cable on the way in — the difference between working on the bench and working at the end of an installed run.

  • 4K @ 60Hz 4:4:4 pass-through — HDR10 and Dolby Vision preserved
  • S/PDIF and analogue stereo together from a PCM source — Dolby Digital and DTS on the optical output
  • Three-stage EDID switch keeps the source honest
Drawings
EDID5.1CH2.0CHPASSHDMI INPOWERDC 5VHDMI OUTS/PDIF OUTAUDIO OUTLRAUDIO EXTRACTOR
Drawn from the production silkscreen · Audio extractor, top, with the end faces unfolded
TC-DE-EMBEDDER outline drawing, 80 × 90 × 22 mm (body; 100 mm across the ears) (W × D × H)

Outline for layout, rack and furniture planning · millimetres, nominal, from the production artwork · connector protrusions, feet and cables not shown · not for manufacture

A
Specifications

The section that earns
the premium.

ParameterSpecification
Signal standardHDMI 2.0
HDCPHDCP 2.2
Maximum resolution4K @ 60 Hz 4:4:4 8-bit (to 4096 × 2160)
Bandwidth18 Gbps
HDRHDR10, Dolby Vision
HDMI audio formatsHDMI in / out: PCM 2.0/5.1/7.1, Dolby TrueHD, DTS-HD Master Audio
Audio de-embeddingS/PDIF (TOSLINK): PCM 2.0, Dolby Digital, DTS 5.1 · analogue L/R (RCA): PCM 2.0 · both at once; with Dolby Digital or DTS, the optical output only
Inputs1 × HDMI · DC 5 V power
OutputsHDMI out (pass-through) · TOSLINK · RCA L/R
EDID managementThree-position switch (PASS · 2.0CH · 5.1CH) sets the audio capability the EDID reports
Power supply5 V DC input
Power consumption2.16 W (2K full load) · 2.88 W (4K full load)
Dimensions (W × D × H)80 × 90 × 22 mm, without the mounting ears
Weight230 g
Operating temperature0 to 45 °C
Storage temperature−20 to 70 °C
Humidity10–90 %, non-condensing
ESD protection±8 kV air · ±4 kV contact
ComplianceDesigned for global compliance — CE, FCC, RoHS, and regional certifications, as applicable.
Warranty3 years
Every value above is taken from the manufacturer's documentation for this model and matches the TELECIS datasheet. Subject to change without notice.
Specification text for consultants8 clauses · basis of design

Basis of design: TELECIS TC-DE-EMBEDDER.

  1. General The audio extractor shall pass HDMI through to the display and take its audio out to S/PDIF (TOSLINK) and analogue RCA.
  2. Video The extractor shall support HDMI 2.0, 18 Gbps and HDCP 2.2, up to 4K @ 60 Hz 4:4:4 8-bit (to 4096 × 2160), pass HDR10 and Dolby Vision, and equalise the input cable automatically.
  3. Audio The HDMI path shall carry PCM 2.0/5.1/7.1, Dolby TrueHD and DTS-HD Master Audio; the S/PDIF output shall carry PCM 2.0, Dolby Digital or DTS 5.1, and the analogue output (RCA L/R) PCM 2.0; both outputs shall work at once, and with Dolby Digital or DTS only the optical output shall carry audio.
  4. Control A three-position switch (PASS, 2.0CH, 5.1CH) shall set the audio capability the EDID reports to the source.
  5. Connections The extractor shall provide 1 × HDMI input, 1 × HDMI output, 1 × TOSLINK, RCA L/R and a DC 5 V input.
  6. Power The extractor shall run from 5 V DC, at 2.16 W (2K full load) and 2.88 W (4K full load).
  7. Physical The extractor shall measure 80 × 90 × 22 mm without the mounting ears and weigh 230 g.
  8. Environmental The extractor shall operate at 0 to 45 °C, be stored at −20 to 70 °C, and tolerate 10–90 % humidity, non-condensing.

Written to paste into a project specification; every clause is taken from the manufacturer's documentation behind this page. Check the datasheet revision before issue.

B
Documents

Engineering documentation,
plainly accessible.

C
Within the family

Specified as a system.

D
Specifying this model

Where it belongs.

Programme audio has to leave the HDMI path somewhere, and behind a display is the wrong place. This extractor sits in the path, passes 4K @ 60Hz 4:4:4 with HDCP 2.2 and HDR intact to the display, and puts the audio out on S/PDIF and analogue together — so, with a PCM source, a digital system and a line-level input can be fed at once; Dolby Digital and DTS leave on the optical output only. The three-stage EDID switch sets what the source believes the room can reproduce.

Set the EDID stage to match the room's actual audio system, not the display's — that is what the switch is for.
Specifying for a project?

Where to buy.

TELECIS is sold through authorised regional partners, and directly by the TELECIS specification desk where no partner is appointed. Write with the model and the project.