Home›Products›AV-over-IP›JPEG2000 4K60 AV over IP Wall Plate Encoder (KVM)
TC-IPE-WP

JPEG2000 4K60 AV over IP Wall Plate Encoder (KVM)

The platform's wall-plate encoder — HDMI and USB-C in, KVM with it

Formerly listed as TC-IPWL-KVM-TX.

TC-IPE-WP

TC-IPE-WP puts a JPEG2000 encoder in a US 2-gang wall plate. It takes HDMI or USB-C at up to 4K @ 60 Hz 4:4:4, switching automatically when a source is connected, and sends picture, audio and USB 2.0 over one 1G Ethernet cable, powered by PoE or a local 12 V supply. From a laptop, one USB-C cable carries video, audio and USB — and charges the laptop when a USB-C PD adapter feeds the second port.

Any decoder of the series on the network can take the stream — point-to-point, as a matrix, or across a video wall of up to 9 × 9, by unicast or multicast. USB follows the video for KVM, so a keyboard, mouse or camera at the decoder reaches the computer at the plate. Line audio can be embedded, and HDMI audio de-embedded to the line output when it is LPCM; Dante AV-A is available on licence, and the encoder answers to its web GUI, TCP, Telnet, SSH or RS-232, or to a third-party control system.

  • JPEG2000 — 4K @ 60 Hz 4:4:4 over 1G Ethernet
  • USB-C — video, audio, USB and charging on one cable
  • 9 × 9 — video wall · matrix · point-to-point
  • PoE — 802.3at, or a local 12 V supply

Views marked “photographed” are photographs of production units at the TELECIS warehouse, cleaned for the web; nothing on the unit is drawn in.

Drawings
USB-CSTATUSUSB-CHDMI12SOURCEHDMIUSB HOSTLAN(PoE)4K60 over IP 1GbEENCODERFRONTREAR
Drawn from the production silkscreen · Wall plate, front and rear
TC-IPE-WP outline drawing, 115.9 × 44.25 × 114.3 mm (W × D × H)

Outline for layout, rack and furniture planning · millimetres, nominal, from the production artwork · connector protrusions, feet and cables not shown · not for manufacture

Signal path
LAPTOPUSB-CSOURCEHDMIENCTC-IPE-WP1G1G SWITCHDECTC-IPD-HDMIHDMIDISPLAYMORE DECODERS: MATRIX,VIDEO WALL TO 9 × 9LINE IN · OUTLOCAL AUDIOLINE IN EMBEDDED · LPCM OUTUSB · KVMUSB DEVICESKEYBOARD · MOUSE · CAMERA
one network cable carries video, audio, USB and control
A
Specifications

The section that earns
the premium.

ParameterSpecification
Signal standardHDMI 2.0b · DisplayPort 1.2 on USB-C
HDCPHDCP 2.2
Maximum resolutionInput up to 4096 × 2160 @ 60 Hz, 4:4:4
Resolution notesOutput resolution is set by the decoder
Bandwidth18 Gbps video · USB 480 Mbps
Colour spaceRGB · YCbCr 4:4:4 / 4:2:2 / 4:2:0
Colour depthInput 8/10/12-bit (8-bit at 4K60 4:4:4) · 10-bit HDR end to end
HDRHDR10, Dolby Vision and HLG passed through · 10-bit end to end
Compression / codecJPEG2000
CECCEC guest-mode control
HDMI audio formatsLPCM 2.0/5.1/7.1, Dolby Digital/Plus/EX, Dolby TrueHD, Dolby Atmos, DTS, DTS-96/24, DTS-EX, DSD, DTS High Res, DTS-HD Master Audio, DTS:X
Audio de-embeddingLine in embedded · LPCM de-embedded to line out
Analogue audio inputLine in (3-pin 3.5 mm Phoenix) · ≥ 10 kΩ · max 1 Vrms
Analogue audio outputLine out (3-pin 3.5 mm Phoenix) · 330 Ω · max 1 Vrms
Networked audioDante AV-A, on licence activation
Analogue performance20 Hz–20 kHz (+0.5 / −1 dB) · S/N > 90 dB (HDMI 0 dB, 1 kHz, A-weighted) · THD+N < 0.05 % (HDMI 0 dB, 1 kHz)
TransportAV over IP — unicast and multicast · point-to-point, matrix, video wall to 9 × 9
Network1G Ethernet
Transmission distance100 m over CAT6/6A/7
Passive cable reachPassive HDMI: 5 m at 4K60 · 10 m at 4K30 · 15 m at 1080p60
Power over the linkPoE (802.3at PD) or local 12 V
Inputs1 × HDMI · 2 × USB-C (USB-C 1 = video, audio, USB; charging via a PD adapter on USB-C 2) · 1 × analogue line in
Outputs1 × analogue line out (3-pin 3.5 mm Phoenix)
USB1 × USB 2.0 host (Type-B) · 2 × USB 2.0 device (Type-A; 5 V / 0.6 A, or 0.2 A on PoE) · KVM
Network ports1 × RJ45 (PoE)
Control portsRS-232 (3-pin 3.5 mm Phoenix)
Control methodsWeb GUI, TCP, Telnet, SSH, RS-232; third-party control systems
SwitchingHDMI / USB-C: automatic on source detection, or manual
Pairs withAny decoder of the same series (TC-IPD-HDMI)
Power supply12 V DC, 2.5 A multinational adapter (2-pin 3.5 mm Phoenix)
Power consumption12 W max
Dimensions (W × D × H)115.9 × 44.25 × 114.3 mm
Weight350 g
HousingAluminium faceplate on an iron case · white faceplate, black case
MountingUS 2-gang wall box
Operating temperature0 to 40 °C
Storage temperature−20 to 60 °C
HumidityOperating 20–80 % · storage 10–90 % RH, non-condensing
ESD protection±15 kV air · ±8 kV contact (IEC 61000-4-2)
ComplianceDesigned for global compliance — CE, FCC, RoHS, and regional certifications, as applicable.
Warranty3 years
In the boxWall-plate encoder · 3 × 3-pin 3.5 mm Phoenix · 12 V / 2.5 A multinational supply
Every value above is taken from the manufacturer's documentation for this model and matches the TELECIS datasheet. Subject to change without notice.
Specification text for consultants8 clauses · basis of design

Basis of design: TELECIS TC-IPE-WP.

  1. General The wall-plate encoder shall fit a US 2-gang wall box and encode HDMI or USB-C to JPEG2000 over 1G Ethernet for TC-IPD-HDMI decoders: unicast or multicast, point-to-point, matrix or video wall to 9 × 9.
  2. Video The encoder shall accept HDMI 2.0b, or DisplayPort 1.2 on USB-C, up to 4096 × 2160 @ 60 Hz 4:4:4, 18 Gbps, HDCP 2.2, switching automatically or manually, and carry HDR10, Dolby Vision and HLG at 10-bit end to end.
  3. Audio The encoder shall pass LPCM 2.0/5.1/7.1, Dolby TrueHD, Dolby Atmos, DTS-HD Master Audio and DTS:X, embed line in and de-embed LPCM to line out. Dante AV-A shall be optional, on licence activation.
  4. Control The encoder shall carry USB 2.0 and KVM with the video, under web GUI, TCP, Telnet, SSH, RS-232 or third-party control.
  5. Connections The encoder shall provide 1 × HDMI, 2 × USB-C (charging via a PD adapter on USB-C 2), 1 × USB 2.0 host (Type-B), 2 × USB 2.0 device (Type-A), line in/out, RS-232 (3-pin 3.5 mm Phoenix) and 1 × RJ45 (PoE).
  6. Power The encoder shall reach 100 m over CAT6/6A/7 and take PoE (802.3at PD) or 12 V DC, 2.5 A, at 12 W max.
  7. Physical The encoder shall measure 115.9 × 44.25 × 114.3 mm (W × D × H) and weigh 350 g.
  8. Environmental The encoder shall operate at 0 to 40 °C and 20–80 % RH, non-condensing, and be stored at −20 to 60 °C.

Written to paste into a project specification; every clause is taken from the manufacturer's documentation behind this page. Check the datasheet revision before issue.

B
Documents

Engineering documentation,
plainly accessible.

C
Within the family

Specified as a system.

D
Specifying this model

Where it belongs.

The same encoder discipline in a wall-plate body, for the source that is a table rather than a rack. A laptop joins the JPEG2000 estate from the room it is in, with USB following the video, so a huddle space becomes a node on the same network as the boardroom without a local rack.

Confirm the back-box depth and that the plate position has PoE or local power before the wall is closed.
Specifying for a project?

Where to buy.

TELECIS is sold through authorised regional partners, and directly by the TELECIS specification desk where no partner is appointed. Write with the model and the project.