Home›Products›AV-over-IP›JPEG2000 4K60 AV over IP Encoder (KVM/eARC)
TC-IPE-HC

JPEG2000 4K60 AV over IP Encoder (KVM/eARC)

HDMI and USB-C in; the display's audio back over eARC

Formerly listed as TC-IPE-KVM-ARC.

TC-IPE-HC

Views marked “photographed” are photographs of production units at the TELECIS warehouse, cleaned for the web; nothing on the unit is drawn in.

TC-IPE-HC encodes an HDMI or USB-C source at up to 4K @ 60 Hz 4:4:4 onto 1G Ethernet with JPEG2000, switching automatically when a source is connected. A laptop on USB-C sends video, audio and USB over one cable and is charged over USB Power Delivery from an adapter on the second USB-C port. A local HDMI output serves a monitor beside the encoder, and the unit runs on PoE, or on a 12 V supply ordered separately.

Audio travels both ways. Line audio can be embedded, and HDMI audio de-embedded to the line output when it is LPCM. Point-to-point, the display's sound comes back from the decoder over eARC or ARC to an amplifier on the encoder's HDMI input, as ARC or S/PDIF from its S/PDIF output, or as analogue from its line output; Dante AV-A is an option on licence. USB follows the video for KVM, IR and RS-232 pass both ways, two relays and two digital I/O handle contact control, and the unit is controlled from the front panel or through IR, RS-232, TCP/IP and the web GUI.

  • JPEG2000 — 4K @ 60 Hz 4:4:4 over 1G Ethernet
  • eARC — point-to-point return; also ARC, S/PDIF or analogue
  • USB-C — video, audio, USB and PD charging for a laptop
  • PoE — 802.3at, or a 12 V supply ordered separately
Drawings
IR OUTIR INDIGITAL IORELAYSRS-232AUDIOOUTDC 12VRXTXRLRLOUTINVCC12ABAB12S/PDIF OUTINUSB-C INLAN(PoE)21EncoderCH SELECT12USB 2.0USB HOSTENCENCODER
Drawn from the production silkscreen · Encoder, top, with the end faces unfolded
TC-IPE-HC outline drawing, 204 × 136 × 25.5 mm (W × D × H)

Outline for layout, rack and furniture planning · millimetres, nominal, from the production artwork · connector protrusions, feet and cables not shown · not for manufacture

Signal path
LAPTOPUSB-CAV RECEIVERHDMIeARCENCTC-IPE-HC1G1G SWITCHDECTC-IPD-HDMIHDMIDISPLAYMORE DECODERS: MATRIX,VIDEO WALL TO 9 × 9HDMI OUTLOCAL MONITORLOOP-OUT BESIDE THE ENCODERUSB · KVMUSB DEVICESKEYBOARD · MOUSE · CAMERA
point-to-point, the display's sound returns to the receiver over eARC
A
Specifications

The section that earns
the premium.

ParameterSpecification
Signal standardHDMI 2.0b
HDCPHDCP 2.2
Maximum resolutionInput up to 4K 50/60 Hz 4:4:4
Resolution notesOutput timing is set at the decoder: Auto, or fixed from 4096 × 2160 @ 60 Hz down to 1024 × 768
Bandwidth18 Gbps video · USB 2.0 480 Mbps
Colour spaceRGB · YCbCr 4:4:4 / 4:2:2 / 4:2:0
Colour depthInput 8/10/12-bit
HDRHDR10, Dolby Vision and HLG passed through · 10-bit end to end at 4K60 4:2:0 / 4:2:2 (8-bit at 4:4:4)
Compression / codecJPEG2000
CECCEC guest-mode control
HDMI audio formatsLPCM 2.0/5.1/7.1, Dolby Digital/Plus/EX, Dolby TrueHD, Dolby Atmos, DTS, DTS-96/24, DTS-EX, DSD, DTS High Res, DTS-HD Master Audio, DTS:X · 32–192 kHz
Analogue audio inputLine in (3-pin 3.81 mm Phoenix) · 10 kΩ · max 1 Vrms (0 dB) unbalanced
Analogue audio outputLine out (3-pin 3.81 mm Phoenix) · 33 Ω · max 0.9 Vrms unbalanced
Audio returneARC / ARC / S/PDIF / analogue audio return from the decoder, point-to-point (unicast) · encoder and decoder set to the same return mode
Networked audioOptional Dante AV-A, on licence activation: up to 2 × 2 channels, 44.1 / 48 / 88.2 / 96 kHz, LPCM
Analogue performance20 Hz–20 kHz ±0.146 dB · S/N 96 dB (0 dB, 1 kHz, A-weighted) · THD+N 0.014 % (0 dBV, 1 kHz) · sync delay 0–50 ms
Other audio formatsS/PDIF optical output — carries returned ARC or S/PDIF audio
TransportAV over IP — unicast and multicast · point-to-point, matrix, video wall to 9 × 9
Network1G · managed network switch
Transmission distance100 m over CAT6/6A/7
Passive cable reachPassive HDMI: 5 m at 4K60 · 10 m at 4K30 · 15 m at 1080p60
Power over the linkPoE (802.3at PD), or a 12 V supply ordered separately
Inputs1 × HDMI · 1 × USB-C video · 1 × USB-C PD power input (adapter up to 100 W; charges the source) · 1 × analogue line in
Outputs1 × HDMI (local) · 1 × analogue line out · 1 × S/PDIF optical
USB1 × USB 2.0 host (Type-B) · 2 × USB 2.0 device (Type-A) · KVM, camera
Network ports1 × RJ45 (PoE)
Control portsRS-232 (3-pin Phoenix) · 2 × relay · 2 × digital I/O · IR in / out (3.5 mm, 5 V / 12 V)
Control methodsFront-panel buttons, IR, RS-232, TCP/IP, web GUI
IRTwo-way IR · 12 V default, 5 V selectable · wideband 20–60 kHz
Relays / GPIO2 × relay, 2 × digital I/O
SwitchingHDMI / USB-C: automatic on source detection, or manual (API or web GUI)
Power supplyPoE (802.3at), or a 12 V DC / 2.5 A locking supply ordered separately
Power consumption12 W max
Dimensions (W × D × H)204 × 136 × 25.5 mm
Weight632 g
HousingMetal, black
Operating temperature0 to 40 °C
Storage temperature−20 to 60 °C
HumidityOperating 20–80 % · storage 10–90 % RH, non-condensing
ESD protection±15 kV air · ±8 kV contact (IEC 61000-4-2)
ComplianceDesigned for global compliance — CE, FCC, RoHS, and regional certifications, as applicable.
Warranty3 years
In the boxEncoder · IR receiver cable (1.5 m) · IR blaster cable (1.5 m) · 3 × 3-pin and 2 × 4-pin 3.81 mm Phoenix · 2 mounting ears · 4 screws · no power supply (PoE; a 12 V supply is ordered separately)
Every value above is taken from the manufacturer's documentation for this model and matches the TELECIS datasheet. Subject to change without notice.
Specification text for consultants9 clauses · basis of design

Basis of design: TELECIS TC-IPE-HC.

  1. General The encoder shall encode HDMI or USB-C to JPEG2000 over 1G Ethernet, unicast or multicast, point-to-point, matrix or video wall to 9 × 9.
  2. Video The encoder shall accept HDMI 2.0b up to 4K @ 60 Hz 4:4:4, 18 Gbps, with HDCP 2.2.
  3. Colour The encoder shall accept deep colour input up to 12-bit (8/10/12-bit), and pass 10-bit HDR (HDR10, Dolby Vision, HLG) end to end at 4K60 4:2:0 / 4:2:2 (8-bit at 4:4:4).
  4. Audio The encoder shall pass LPCM 2.0/5.1/7.1, Dolby TrueHD, Dolby Atmos, DTS-HD Master Audio and DTS:X, and receive point-to-point audio return from the decoder as eARC, ARC, S/PDIF or analogue. Dante AV-A shall be optional, on licence activation.
  5. Control The encoder shall carry USB 2.0 (KVM), IR, RS-232 and CEC with the video, under front-panel, IR, RS-232, TCP/IP or web GUI control.
  6. Connections The encoder shall provide 1 × HDMI and 1 × USB-C video inputs, 1 × USB-C PD power input (up to 100 W, charging the source), 1 × HDMI local output, 1 × S/PDIF optical output, line in/out, 2 × USB 2.0 device (Type-A), 2 × relay, 2 × digital I/O and 1 × RJ45 (PoE).
  7. Power The encoder shall reach 100 m over CAT6/6A/7 and take PoE (802.3at PD) or 12 V DC, 2.5 A, at 12 W max.
  8. Physical The encoder shall measure 204 × 136 × 25.5 mm (W × D × H) and weigh 632 g.
  9. Environmental The encoder shall operate at 0 to 40 °C and 20–80 % RH, non-condensing, and be stored at −20 to 60 °C.

Written to paste into a project specification; every clause is taken from the manufacturer's documentation behind this page. Check the datasheet revision before issue.

B
Documents

Engineering documentation,
plainly accessible.

C
Within the family

Specified as a system.

D
Specifying this model

Where it belongs.

The encoder for positions where sound has to come back as reliably as pictures go out. An HDMI or USB-C source joins the JPEG2000 platform at 4K @ 60Hz 4:4:4, USB follows the video for KVM, and the display's own audio returns from the decoder over eARC/ARC, point-to-point — which is what a room with a soundbar or a display-integrated audio path actually needs.

Confirm the display's ARC or eARC support and which HDMI port carries it — not every port on a display does. Audio return is specified point-to-point (unicast), with the encoder and decoder set to the same return mode.
Specifying for a project?

Where to buy.

TELECIS is sold through authorised regional partners, and directly by the TELECIS specification desk where no partner is appointed. Write with the model and the project.