Home›Products›AV-over-IP›JPEG2000 4K60 AV over IP Decoder (USB/Audio)
TC-IPD-HDMI

JPEG2000 4K60 AV over IP Decoder (USB/Audio)

4K60 4:4:4 from the network to the display, with USB and audio both ways

Formerly listed as TC-IPD-USB-AU.

TC-IPD-HDMI

TC-IPD-HDMI decodes JPEG2000 from a 1G network to HDMI 2.0b at up to 4K @ 60 Hz 4:4:4, with HDCP 2.2. Copper and fibre network ports share one unit, the copper port with PoE, and the decoder works point-to-point, in a matrix, or as one screen of a video wall up to 9 × 9, unicast or multicast. Channels are chosen from the front panel, with an LED channel display, or through the web GUI, Telnet, SSH or the TC-IPC control box.

The HDMI output carries LPCM up to 7.1 and the Dolby and DTS formats up to Dolby Atmos and DTS:X, and LPCM also reaches the analogue line output. Point-to-point, the display's sound returns to the encoder over eARC or ARC, S/PDIF or analogue; Dante AV-A is an option on licence. USB follows the video for KVM and camera extension on four USB-A device ports (two USB 2.0, two USB 1.1), IR and RS-232 pass both ways, CEC reaches the display, and two relays and two digital I/O handle contact control where the screen is.

  • 4K60 4:4:4 — HDMI 2.0b · 18 Gbps · HDCP 2.2
  • JPEG2000 — over 1G Ethernet, copper or fibre
  • 9 × 9 — video wall · matrix · point-to-point
  • PoE — or a 12 V supply ordered separately · 7.8 W max
Drawings
DecoderIR OUTIR INDIGITAL IORELAYSRS-232AUDIOS/PDIF INOUTLAN (PoE)DC 12VRXTXRLRLOUTINVCC12ABAB12FIBRERESETPOWERLINKCH SELECTUSB 1.1 DEVICEUSB 2.0 DEVICE1234DECDECODER
Drawn from the production silkscreen · Decoder, top, with the end faces unfolded
TC-IPD-HDMI outline drawing, 204 × 136 × 25.5 mm (W × D × H)

Outline for layout, rack and furniture planning · millimetres, nominal, from the production artwork · connector protrusions, feet and cables not shown · not for manufacture

Signal path
SOURCEHDMIENCTC-IPE-HC / -WP1G1G SWITCH1GDECTC-IPD-HDMIHDMIDISPLAYCONTROLCONTROLLERTC-IPC · MATRIX · WALLS TO 9 × 9USB · KVMUSB DEVICESKEYBOARD · MOUSE · CAMERALINE OUTAMPLIFIERLPCM · ANALOGUE
the controller routes an encoder to this decoder; audio and USB at the display
A
Specifications

The section that earns
the premium.

ParameterSpecification
Signal standardHDMI 2.0b
HDCPHDCP 2.2
Maximum resolutionOutput up to 4K @ 60 Hz, 4:4:4
Bandwidth18 Gbps
Colour spaceRGB 4:4:4 · YCbCr 4:4:4 / 4:2:2 / 4:2:0
Colour depthOutput 8-bit at 4K60 4:4:4 · 10-bit at 4K60 4:2:0 / 4:2:2
HDRPassed through, 10-bit
Compression / codecJPEG2000
CECCEC guest-mode control
HDMI audio formatsLPCM 2.0/5.1/7.1, Dolby Digital/Plus/EX, Dolby TrueHD, Dolby Atmos, DTS, DTS-96/24, DTS-EX, DSD, DTS High Res, DTS-HD Master Audio, DTS:X
Analogue audio inputLine in (3-pin 3.81 mm Phoenix) — returns audio to the encoder's line out, point-to-point (unicast) only
Analogue audio outputLine out (3-pin 3.81 mm Phoenix) — carries the HDMI output's audio when it is LPCM
Audio returnAudio return to the encoder, point-to-point (unicast): eARC / ARC / S/PDIF / analogue · encoder and decoder set to the same return mode
Networked audioDante AV-A, on licence activation
Other audio formatsS/PDIF optical input — return path to the encoder
TransportAV over IP — copper and fibre ports in one unit · unicast / multicast · video wall to 9 × 9
Network1G Ethernet
Transmission distance100 m over CAT5e/6/6A/7
Passive cable reachPassive HDMI: 5 m at 4K60 · 10 m at 4K30 · 15 m at 1080p60
Power over the linkPoE
InputsNetwork: 1 × RJ45 (PoE) or fibre slot · audio: 1 × S/PDIF optical, 1 × analogue line in
Outputs1 × HDMI · 1 × analogue line out
USB2 × USB 1.1 device + 2 × USB 2.0 device (Type-A) · USB 2.0 / KVM / camera extension
Network ports1 × RJ45 (PoE) · 1 × fibre slot
Control portsRS-232 · 2 × relay · 2 × digital I/O · IR in / out (3.5 mm)
Control methodsFront-panel channel select with display · web GUI · Telnet · SSH
IR12 V default, 5 V optional · wideband 20–60 kHz
Relays / GPIO2 × relay (isolated, to 1 A at 30 V DC) · 2 × digital I/O (detects up to 12 V) · VCC output, 12 V or 5 V
Power supplyPoE, or a 12 V DC / 2.5 A locking adapter ordered separately
Power consumption7.8 W max
Dimensions (W × D × H)204 × 136 × 25.5 mm
Weight626 g
HousingMetal, black
Operating temperature0 to 40 °C
Storage temperature−20 to 60 °C
Humidity20–90 % RH, non-condensing
ESD protection±8 kV air · ±4 kV contact (IEC 61000-4-2)
ComplianceDesigned for global compliance — CE, FCC, RoHS, and regional certifications, as applicable.
Warranty3 years
In the boxDecoder · IR receiver cable (1.5 m) · IR blaster cable (1.5 m) · 3 × 3-pin 3.81 mm Phoenix · plug for the relay / digital-I/O terminal · 2 mounting ears · 4 screws · no power adapter (PoE; a 12 V adapter is ordered separately)
Every value above is taken from the manufacturer's documentation for this model and matches the TELECIS datasheet. Subject to change without notice.
Specification text for consultants9 clauses · basis of design

Basis of design: TELECIS TC-IPD-HDMI.

  1. General The decoder shall decode JPEG2000 from 1G Ethernet to HDMI, unicast or multicast, point-to-point, matrix or video wall to 9 × 9, with copper and fibre network ports in one unit.
  2. Video The decoder shall output HDMI 2.0b up to 4K @ 60 Hz 4:4:4, 18 Gbps, with HDCP 2.2 and CEC guest-mode control.
  3. Colour The decoder's output colour depth shall be 8-bit at 4K60 4:4:4, and 10-bit with HDR at 4K60 4:2:0 / 4:2:2.
  4. Audio The HDMI output shall carry LPCM 2.0/5.1/7.1, Dolby TrueHD, Dolby Atmos, DTS-HD Master Audio and DTS:X. Audio shall return point-to-point to the encoder as eARC, ARC, S/PDIF or analogue. Dante AV-A shall be optional, on licence activation.
  5. Control The decoder shall extend USB 2.0, KVM and camera, with IR, RS-232 and CEC over the network, and be controlled by front-panel channel select, web GUI, Telnet or SSH.
  6. Connections The decoder shall provide 1 × HDMI output, 1 × RJ45 (PoE), 1 × fibre slot, 1 × S/PDIF optical input, line in/out, 2 × USB 2.0 and 2 × USB 1.1 device (Type-A), RS-232, IR in/out, 2 × relay and 2 × digital I/O.
  7. Power The decoder shall reach 100 m over CAT5e/6/6A/7 and take PoE or 12 V DC, 2.5 A, at 7.8 W max.
  8. Physical The decoder shall measure 204 × 136 × 25.5 mm (W × D × H) and weigh 626 g.
  9. Environmental The decoder shall operate at 0 to 40 °C, be stored at −20 to 60 °C, and tolerate 20–90 % RH, non-condensing.

Written to paste into a project specification; every clause is taken from the manufacturer's documentation behind this page. Check the datasheet revision before issue.

B
Documents

Engineering documentation,
plainly accessible.

C
Within the family

Specified as a system.

D
Specifying this model

Where it belongs.

The decode position, specified for a desk rather than a wall. Video arrives at 4K @ 60Hz 4:4:4, USB is routed with it so the operator drives a remote machine from a local keyboard and mouse, and audio is available de-embedded on an analogue line output for a local speaker or a DSP input.

Confirm whether the position needs USB at all — a display-only endpoint and a workstation are different specifications.
Specifying for a project?

Where to buy.

TELECIS is sold through authorised regional partners, and directly by the TELECIS specification desk where no partner is appointed. Write with the model and the project.