In India, notified electronics and IT goods may not be manufactured or stored for sale, imported, sold or distributed unless they conform to the Indian Standard named for them and bear the BIS Standard Mark with a unique registration number, the R-number, under the Compulsory Registration Scheme. In an AV submittal the scheme reaches the displays, the computers, the power adaptors and a growing set of peripherals, but not every box in the rack. The check is three questions per item: is it on the list, is the number real and current, and does the label match the registration?
Which order governs BIS registration of electronics?
MeitY's Electronics and Information Technology Goods (Requirements for Compulsory Registration) Order. The first was notified on 3 October 2012. It has been superseded by the Order of 2021, S.O. 1248(E) of 18 March 2021, which MeitY amends as categories and standards change: S.O. 4997(E) of November 2025 moved the rows that cited IS 13252 (Part 1) and IS 616 to IS/IEC 62368-1:2023, and 2026 amendments restated an exemption for highly specialised equipment and added standalone hard disk drives and smartphone screen protectors.
BIS runs it as Scheme-II of its conformity assessment regulations. The manufacturer self-declares conformity on test reports from BIS-recognised laboratories, without a BIS factory inspection, and BIS grants a registration for two years at a time.
Which items in an AV system are on the list?
Checked against the list as BIS publishes it at the end of October 2026:
Displays. Plasma/LCD/LED televisions, and visual display units and video monitors, each in two rows, 32″ and above and up to 32″: a meeting-room television or monitor is notified at any size.
Computing. Laptops, notebooks and tablets; automatic data processing machines; keyboards and wireless keyboards; printers and scanners.
Power. Power adaptors for IT equipment; power adaptors for audio, video and similar electronic apparatus; standalone switch-mode power supplies with output voltage up to 48 V; UPS and inverters, in rows up to 5 kVA and up to 10 kVA, to IS 16242 (Part 1).
AV devices. Set-top boxes; webcams (finished product); video cameras and digital cameras; wireless microphones; Bluetooth and smart speakers; wireless headphones and earphones; CCTV cameras and recorders. The amplifier row reads “Amplifiers with input power 2000W and above”.
All of these rows except the UPS rows now cite IS/IEC 62368-1:2023. Until 1 November 2028 the older standards run concurrently with it: IS 13252 (Part 1):2010 for information technology equipment and IS 616:2017 for audio, video and similar apparatus, against which webcams, video cameras and wireless microphones were added in 2020. An R-number stays the same when its registration migrates, so a submittal may show either standard.
What does the list not name?
The list names product categories, not systems. No row names a projector, a video matrix switcher, or an HDMI or HDBaseT extender, and amplifiers below 2,000 W input power fall outside the amplifier row. The Order also exempts highly specialised equipment made or imported in fewer than 100 units per model a year that meets one of four criteria: three-phase supply, single-phase above 16 A, larger than 1.5 m × 0.8 m, or heavier than 80 kg.
Some rows are broad, “Automatic Data Processing Machine” among them, and the list moves. Treat “not notified” as a statement for the maker to make in writing, against a dated list, row by row.
Why does the adapter in the box need its own R-number?
Because power adaptors are notified in their own right, one row for IT equipment and one for audio, video and similar apparatus. A Customs public notice on the Order puts it plainly: “Registration is required for Power Adaptors & Batteries also, as these are independently notified under CRO”, while the consolidated product bears the number of the overall product. So a 12 V adapter shipped with an extender brings a notified product into the room even when the extender is not one. It should carry its own Standard Mark and an R-number registered for the adapter's brand and model.
What must the label show?
The Standard Mark: BIS's monogram with the Indian Standard and the R-number, which BIS illustrates as “IS/IEC 62368-1” over “R-xxxxxxxx”. A registration letter's Annex-I sets the rest: on the article and/or the packaging, easily visible; legible, indelible and non-removable; the IS number, registration number and words no smaller than Arial size 6. A device with an integrated display screen may present the mark electronically instead. A Customs notice adds that the mark goes on both product and packaging, and on the packaging alone only where the product is too small.
How do you verify an R-number?
In the BIS Care app, “Verify R-No under CRS” returns the registered manufacturer's details for an eight-digit R-number, and “Registered Manufacturer under CRS” lists registrations by product category and model. The QR code on a BIS registration letter verifies the letter.
Then read the letter. It names the product category, the standard, the brand, the models and the factory, with validity dates, and the registration covers that brand and those models at that address; it is not transferable. It runs for two years and is renewed, so check the dates against the delivery, and the model on the label against the letter.
What else does a wireless or networked device need?
For these rows, BIS registration answers the safety question; radio and telecom have regimes of their own. Equipment Type Approval (ETA), issued by the Wireless Planning & Coordination Wing of the Department of Telecommunications, covers devices that operate in de-licensed frequency bands; it is permitted on self-declaration, through the Saral Sanchar portal, and the Department's examples include laptops, smartwatches and headphones. Under MTCTE, telecommunication equipment notified under the scheme may not be sold or deployed without a valid Certificate of Conformity Assessment; the Telecommunication Engineering Centre administers it, and notified types include Wi-Fi access points, routers and smart cameras. An R-number is neither an ETA nor an MTCTE certificate.
The submittal checklist
- Row: for each item, the row of the BIS list it falls under, or the maker's written statement that it falls under none, with the date of the list.
- Registration: the R-number and the BIS registration letter, with the standard (IS/IEC 62368-1:2023, or IS 13252 (Part 1):2010 or IS 616:2017 until 1 November 2028) and the validity dates.
- Match: the brand and model on the letter are the brand and model being supplied.
- Power: every external adaptor, standalone power supply and UPS with its own R-number.
- Label: the Standard Mark with the IS number and R-number on the product and its packaging, or e-labelled on a display.
- Verification: each R-number checked in BIS Care before approval.
- Radio and network: WPC ETA for de-licensed radio; a TEC certificate where the equipment type is notified under MTCTE.
- Exemptions: any highly specialised equipment exemption claimed, with its basis.
The wider questions to put to a maker are in Qualifying an AV manufacturer before you specify it. An R-number is an eight-digit claim that the BIS Care app checks in moments: check it at submittal, not at the loading bay.
Questions, answered briefly
Which AV products need BIS registration in India?
Products in the categories notified under MeitY's compulsory registration order. In an AV system these include televisions and video monitors of any size, laptops and computers, keyboards, power adaptors for IT and for audio-video equipment, UPS units up to 10 kVA, set-top boxes, webcams, video cameras, wireless microphones and Bluetooth speakers. The list changes by amendment, so check each item against the list BIS publishes.
How do I verify a BIS R-number?
Use the BIS Care app's 'Verify R-No under CRS' function, which returns the registered manufacturer's details for an eight-digit R-number, or scan the QR code on the BIS registration letter. Then check that the letter names the brand and model being supplied and that it is in date.
Does a power adapter need its own BIS registration?
Yes. Power adaptors for IT equipment and for audio, video and similar apparatus are notified in their own right, so an external adapter carries its own Standard Mark and R-number, separate from the product it powers, even when that product is not itself notified.
Which standard applies now: IS 13252, IS 616 or IS/IEC 62368-1?
The current list cites IS/IEC 62368-1:2023 for most electronics and IT categories. BIS allows IS 13252 (Part 1):2010 and IS 616:2017 to run concurrently with it until 1 November 2028, and an existing R-number stays the same after migration.