Home›Journal›De-embed at the output
ENGINEERING · 8 August 2026 · 4 min read

De-embed at the output.

Audio should leave the matrix with the video it belongs to — coaxial and analogue L/R at every output — not through a shelf of external extractors that each brought a power supply and an opinion about EDID.

JOURNAL / 004
AUDIO LEAVES WITH THE VIDEO8×8 MATRIXTC-PMX-0808HDMICOAXL / RHDMICOAXL / RHDMICOAXL / RHDMICOAXL / REVERY OUTPUT · DE-EMBEDDED AT THE FRAMETHE ALTERNATIVEEXTRACTOREXTRACTOREXTRACTOREXTRACTOR8 PSUs · 8 FAILURE POINTS · 0 REASONS
Eight outputs, eight audio feeds, zero external extractors.

Walk the back of a boardroom rack that was value-engineered and you will find them: HDMI audio extractors, one per zone, velcroed where airflow used to be. Each one has a wall-wart, a failure probability, and — quietly, disastrously — a position in the EDID chain, negotiating capabilities on behalf of a room that never asked it to.

The audio was in the HDMI stream all along. The only question is where it leaves — and the engineering answer is at the matrix output, where the routing decision has already been made.

What per-output de-embedding buys

On an 8×8 like TC-PMX-0808, every output de-embeds to coaxial S/PDIF and analogue L/R at the frame. Route source three to output five and its audio arrives at output five's terminals — following the video automatically, because it never left it. The DSP gets line level without a converter. The zone amplifier gets its feed from the rack, not from behind a display. Programme audio for assisted listening comes off the same output that feeds the screen it must stay in sync with.

What the extractor stack costs

Count honestly: eight extractors are eight power supplies on unswitched spurs, eight more devices with firmware nobody will ever update, eight EDID hops that each shave capability negotiation a little differently, and eight things between the signal and the loudspeaker that were never in the drawing. The failure modes are worse than the arithmetic — an extractor that half-dies passes video and drops audio, which reads as a "sound system problem" and burns an afternoon of the wrong engineer's time.

The specification line

Write it the way it verifies on the datasheet: matrix shall provide per-output audio de-embedding, coaxial and analogue L/R, at every output. Rooms that need format conversion or eARC handling still have their dedicated tools — that is what the converter family is for, deliberately. But the default path for programme audio in a routed room should be the shortest one, and the shortest one is the output terminal of the matrix that already knows where the video went.

Editor's note, 18 November 2026. The model codes in this article are updated to the codes printed on the units: TC-PMX-808 now reads TC-PMX-0808. Nothing else is changed.

Published by TELECIS · 8 August 2026 · Filed under Engineering
Specifying?

Send the room.

We return the architecture, the bill of materials, and the route to supply.